DIf the AV amplifier (receiver) has an MPEG audio decoder
Item | Select | Page |
|
|
|
MPEG | MPEG |
If you connect the component using an optical digital cord, set “SOUND MODE” to “NORMAL” (page 43). Otherwise no sound will be heard.
Notes on playing DVDs with a DTS
sound track
•If you connect the player to audio component without a DTS decoder, set “DTS” to “OFF” in “CUSTOM SETUP” (page 67). If you set it to “ON,” a loud noise may come out from the speakers, affecting your ears or causing the speakers to be damaged.
•If you play a DTS sound track with “DTS”set to “ON,” you will hear no sound from the headphones of this player and [DTS] appears on the Status Bar.
Watching a Video on the
TV
1 Turn on your TV.
2 Switch the input selector on the TV to the player.
When using an amplifier (receiver)
Turn on the amplifier (receiver) and select the appropriate channel.
3 Place the disc on the tray with the playback side facing down.
4 Press NX.
If you use the remote, press H. The player starts playback. Adjust the volume on the TV or the amplifier (receiver).
To change the color system of the player to match that of your TV (Hong Kong, China and tourist models only)
Set the NTSC/PAL switch on the player to match your TV or monitor’s color system.
Notes
•This does not change the color system of the DVD disc itself.
•If the picture of the VIDEO CD is noisy, try switching the NTSC/PAL switch.
62