Sony D6653 Increasing Wi-Fi signal strength, Wi-Fi settings, To add a Wi-Fi network manually

	To connect to a Wi-Fi® network automatically
1	From your Home screen, tap .
2	Find and tap Settings.

3Tap Wi-Fi. All available Wi-Fi® networks are displayed.

4Tap a Wi-Fi® network to connect to it. For secured networks, enter the relevant password. is displayed in the status bar once you are connected.

To search for new available networks, tap , and then tap Scan.

To add a Wi-Fi® network manually

1 From your Home screen, tap .

2Find and tap Settings > Wi-Fi.

3Tap .

4Enter the Network name (SSID) information.

5To select a security type, tap the Security field.

6 If required, enter a password.

7 To edit some advanced options such as proxy and IP settings, mark the Show advanced options checkbox and then edit as desired.

8 Tap Save.

Contact your Wi-Fi® network administrator to get the network SSID and password.

Increasing Wi-Fi® signal strength

There are a number of things you can do to increase the strength of a Wi-Fi® signal:

•Move your device closer to the Wi-Fi® access point.

•Move the Wi-Fi® access point away from any potential obstructions or interference.

•Don’t cover the Wi-Fi® antenna area of your device (the highlighted area in the illustration).

Wi-Fi® settings

When you are connected to a Wi-Fi® network or when there are Wi-Fi® networks available in your vicinity, it is possible to view the status of these networks. You can also enable your device to notify you whenever an open Wi-Fi® network is detected.

If you are not connected to a Wi-Fi® network, your device uses a mobile data connection to access the Internet (if you have set up and enabled a mobile data connection on your device). By adding a Wi-Fi® sleep policy, you can specify when to switch from Wi-Fi® to mobile data.

30

This is an Internet version of this publication. © Print only for private use.