Sony DA1500ES, STR-DA1500ES Specifications

56US

D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U

VERSION\US\4129743111\US08REM_STR-DA1500ES-U.fm

masterpage: Left

STR-DA1500ES

4-129-743-11(1)

Specifications

AUDIO POWER

SPECIFICATIONS

POWER OUTPUT AND TOTAL

HARMONIC DISTORTION:

(Models of area code UC only)

With 8 ohms loads, both channels driven, from

20 – 20,000 Hz; rated 95 watts per channel

minimum RMS power, with no more than

0.09% total harmonic distortion from 250

milliwatts to rated output.

Amplifier section

Models of area code UC1)

Minimum RMS Output Power (8 ohms, 20 Hz –

20 kHz, THD 0.09%)

95 W + 95 W

Stereo Mode Output Power (8 ohms, 1 kHz,

THD 0.7%)

105 W + 105 W

1)Measured under the following conditions:

Frequency response

PHONO RIAA equalization curve

±0.5 dB

Analog 10 Hz – 70 kHz

+0.5/–2 dB (Bass: 0 dB,

Treble: 0 dB)

Inputs

PHONO Sensitivity: 2.5 mV

Impedance: 50 kohms

S/N2): 90 dB

(A, 20 kHz LPF)3)

Analog Sensitivity: 150 mV/

50 kohms

S/N2): 96 dB

(A, 150 mV3))

Outputs (Analog)

AUDIO OUT Voltage: 150 mV/10

kohms

Equalizer

Gain levels ±10 dB, 1 dB step

2)INPUT SHORT (Bass: 0 dB, Treble: 0 dB).

3)Weighted network.

FM tuner section

Tuning range 87.5 - 108.0 MHz

Antenna (aerial) FM wire antenna (aerial)

Antenna (aerial) terminals

75 ohms, unbalanced

Intermediate frequency

10.7 MHz

AM tuner section

Tuning range

Antenna (aerial) Loop antenna (aerial)

Intermediate frequency

450 kHz

Video section

Inputs/Outputs

Video: 1 Vp-p/75 ohms

General

Power requirements

Power output (DIGITAL MEDIA PORT)

DC OUT: 5 V, 0.7 A MAX

Power consumption

Power consumption (during standby mode)

0.3 W (when “RS232C” is

set to “OFF”)

Area code Power requirements

UC 120 V AC, 60 Hz

Area code Tuning scale

10 kHz step 9 kHz step

UC 530 –

1,710 kHz

531 –

1,710 kHz

Area code Power requirements

UC 120 V AC, 60 Hz

Area code Power consumption

UC 210 W

Contents

Main To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. For customers in the United States and Canada For customers in the United States WARNING Owners Record Important Safety Instructions CAUTION About This Manual About area codes On Copyrights Table of Contents Getting Started Playback Amplifier Operations Tuner Operations Description and location of parts Page Rear panel AANTENNA section BDMPORT CRS232C port DControl jacks for Sony equipment and other external components Remote commander Page Page Notes - 1: Installing the speakers Example of the speaker system configuration ASpeaker cords (not supplied) 2: Connecting the speakers Getting Started 3a: Connecting the audio components Connecting a Super Audio CD player, CD player, MD deck, Tape deck or Turntable 3b: Connecting the video components How to connect your components If you connect a DVD player Connecting a Blu-ray disc player, DVD player BVideo cord (not supplied) AB Connecting a satellite tuner, Set-top box Connecting components with analog video and audio jack BVideo cord (not supplied) 4: Connecting the antennas (aerials) 5: Preparing the receiver and the remote Connecting the AC power cord (mains lead) 1 receiver. 2 3 Performing initial setup operations 6: Selecting the speaker system Press SPEAKERS (OFF/A/B/A+B) repeatedly to select the speaker system you want to drive. To turn off the speaker output Enjoying sound/images from the component connected to the receiver 1 a component. You can also use INPUT SELECTOR on the receiver. The selected input appears on the display. 2 1 3 4 5 6 7 Navigating through menus 1 2 3 4 Amplifier Operations Overview of the menus Adjusting the level (LEVEL menu) LEVEL menu parameters Adjusting the equalizer (EQ menu) Settings for the tuner (TUNER menu) TUNER menu parameters Settings for the system (SYSTEM menu) SYSTEM menu parameters xNAME IN (Naming inputs) xDIMMER (Brightness of the display) Listening to FM/AM radio 1 select the FM or AM band. 2 Using the controls on the 1 2 3 4 If you cannot tune in a station 1 2 3 Tuning into a station directly (Direct Tuning) Changing the AM tuning scale Presetting radio stations 1 2 3 4 1 Naming preset stations 2 3 4 Listening to Satellite Radio Connecting a satellite radio tuner To connect to the XM jack Checking the ID number To connect to the SIRIUS jack Preparing to listen to a satellite radio 7 8 Using the controls on the 1 2 6 7 XM Signal Strength SIRIUS Signal Strength 1 Selecting a channel of the satellite radio 1 select XM RADIO or SIRIUS. 2 repeatedly to select the ONE CAT. 1 2 3 4 Presetting satellite radio channels 1 2 Selecting channels by inputting the channel number directly (DIRECT TUNING) Displaying the satellite tuner information on the front panel display Presetting channels using the preset numbers 3 4 5 6 1 Restricting access to specific channels (Parental Lock) (SIRIUS only) 1 2 3 Page XM Radio messages list Tuner Operations SIRIUS Satellite Radio message list Enjoying the DIGITAL MEDIA PORT Other Operations (DMPORT) To detach the DIGITAL MEDIA PORT adapter from DMPORT jack Connecting the DIGITAL MEDIA PORT adapter AVideo cord (not supplied) 1 2 Changing the display Press DISPLAY repeatedly. All inputs except the FM and AM band, XM Radio and SIRIUS Satellite Radio Using the Sleep Timer Recording using the receiver 1 2 3 1 to select the playback 2 component for playing. 3 Zone 2 connections Outputs sound from speakers in zone 2 using the receiver and another amplifier. Making a multi-zone operation 1 receiver). 2 3 4 to select the source you want. Changing button assignments 1 which you want to change the assignment. 2 press the corresponding button for the category you want. Precautions On safety On power sources On heat buildup On placement Troubleshooting Audio Video Tuner Page Specifications AUDIO POWER SPECIFICATIONS FM tuner section AM tuner section Video section Page Index