Sony DA5700ES iPhone/iPod, 1, 2, 3, 4, 5

56US

iPhone/iPod

You can enjoy the music/video/photo and

charge the battery of an iPhone/iPod via the

receiver.

For details on the compatible iPhone/iPod

models with this function, see page60.

Note

You cannot use headphones during playback.

1Connect the iPhone/iPod to the

(USB) port on the receiver.

2Select “Watch” or “Listen” from

the home menu, then press .

3Select “My Video,” “My Music,”

or “My Photo,” then press .

Note

If no picture is output, change the setting for

“Playback Resolution” (page111).

4Select “iPod (front),” then press

.

The video/music files are listed on the TV

screen.

If you select “iPod (front)” on “My

Photo,” select a photo file using the

controls on the iPhone/iPod (you do not

need to proceed to step 5).

5Press V/v/B/b and to select

the file that you want to play.

The image or sound from the iPhone/iPod

is played back on the receiver.

You can operate the iPhone/iPod using

the buttons on the remote control

(page60).

For operation details of the iPhone/iPod,

also refer to the operating instructions of

the iPhone/iPod.

iPhone/iPod

(not supplied)

Apple Composite AV Cable

(not supplied)

Contents

Main 2011 Sony Corporation Printed in Malaysia STR-DA5700ES 4-287-973-11(1) Multi Channel AV Receiver Operating Instructions To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. For customers in the United States WARNING Owners Record Important Safety Instructions CAUTION About This Manual On Copyrights Page Main features of the receiver Compatible with a variety of connections and formats Better image and sound quality Useful functions Others Table of Contents Getting Started Enjoying images/sound Enjoying an iPhone/iPod Playing via a Network Adjusting Settings Using the Remote Control Additional Information Description and location of parts Front panel To remove the cover To open the cover Page Indicators on the display Page Page Rear panel Page Multifunction remote control (RM-AAL040) Remote control Page Page Simple remote control (RM-AAU124) Read the following before you connect any equipment Getting Started Note on converting video signals To display Closed Caption To connect a recording equipment Function for conversion of video signals Digital audio formats supported by the receiver 1: Installing speakers 9.1 channel speaker system 7.1 channel speaker system using surround back speakers 7.1 channel speaker system using front high speakers 5.1 channel speaker system Recommended speaker placement 7.1 channel speaker system 6.1 channel speaker system AMonaural audio cord (not supplied) BSpeaker cords (not supplied) Connecting speakers BB AB To enable 9.1 channel playback ZONE 2 connection 2: Connecting the monitor Tip 3: Connecting the video equipment To connect equipment with HDMI jacks If your equipment does not have an HDMI jack, see page31. AHDMI cable (not supplied) Connections required for watching content recorded on a Blu-ray Disc or DVDs To connect equipment with jacks other than HDMI jacks Connections required for playing video games Page Page Page Page Connections required for watching content via a camcorder HDMI features Notes on connecting cables Note on using an HDMI-DVI conversion cable 4: Connecting the audio equipment Page Page Connections required for listening to content recorded on MDs Connections required for listening to the radio Page 5: Connecting to the network System requirements Configuration example 6: Preparing the receiver and the remote control Press ?/1 to turn on the receiver. To save the power in standby mode Connecting the AC power cord (mains lead) Turning on the receiver 1 2 MODE and 2CH/A.DIRECT, press ?/1 to turn on the 3 2CH/A.DIRECT after a few seconds. 7: Setting up the receiver using the Easy Setup Confirm active subwoofer setup When you connect two subwoofers to the receiver Notes on the speaker impedance Notes on Speaker Settings (Auto Calibration) To select the front speakers To use the receiver as a pre- amplifier To cancel the measurement process To set up the receiver manually 8: Setting up connected 9: Preparing a computer to use as a server Guide to on-screen display operation Using the menu 1 input to which the receiver is connected. 2 Overview of the main menus Enjoying images/sound from the connected 1 start playback. the home menu, then press . 2 USB Device/WALKMAN 1 2 3 4 iPhone/iPod 1 2 3 4 DLNA 1 2 3 4 1 screen. 2 provider icon you want to register in Favorites List, then press TOOLS/OPTIONS. 3 FM/AM 1 menu, then press . FM/AM screen SIRIUS Playing files on an iPhone/iPod Compatible iPhone/iPod models For My Video/My Music To operate the iPhone/iPod using the remote control For My Photo Playing files on a home network (DLNA) Preparations for using the DLNA function To play remote files by operating the receiver (Renderer) via a DLNA controller Playing via a Network Listening to FM/AM radio 1 3 4 1 2 1 2 3 4 5 1 3 To name preset stations (Name Input) 1 2 3 1 2 MODE, press ?/1 on the 3 scale to 9 kHz (or 10 kHz). Page Page 4 1 2 3 4 Presetting satellite radio channels 1 2 3 4 Selecting a channel by inputting the channel number directly (Direct Tuning) Page Page Message list Enjoying Sound Effects Selecting the sound field 1 2 3 To listen to music through headphones connected to the receiver Enjoying Sound Effects Playing back with 2-channel sound Playing back with multi-channel surround Enjoying a surround effect for movies About the effect type for HD- D.C.S. xDynamic xTheater xStudio Enjoying a surround effect for music About the effect level for True Concert Mapping A/B Sound Field Mode xLow xMid xHigh About the gain level for PLIIz Height Using the Sound Optimizer function 1 2 3 4 Page What you can do with the Multi-zone function Making a multi-zone connection 1Outputs sound from speakers in zone 2 using the SURROUND BACK (ZONE2) terminals of the receiver. Using Multi-zone Features 1:Zone 2 connections 2:Zone 3 connections Do not use this jack for an Ethernet LAN connection. Doing so may cause a malfunction. 2 Z Be sure to verify the CAT5 wiring connection is correct. Use Category5e or Category 6 cable. Making a zone 2 configuration using ZONE 2 VIDEO OUT (RJ-45 jack) one Setting the speakers in zone 2 1 2 3 4 Operating the receiver from another zone (ZONE 2/ZONE 3 operations) 1 or zone 3. 2 Using Multi-zone Features Using BRAVIA Sync features The Control for HDMI function does not work in the following cases: 1 2 3 6 for HDMI function and to display the image of all the playback equipment you want to use. One-Touch Play Press TV, then press AV ?/1. Start playback on the playback equipment. Switching the monitors that output the HDMI video signals Audio Return Channel (ARC) Scene Select Home Theater Control 1 two monitors. 2 Outputting the HDMI signals even when the receiver is in standby mode (Pass Through) 1 2 3 4 then press . Switching between digital and analog audio 1 INPUT SELECTOR on the 2 Using other video/audio input jacks 4 signals you want to assign to each input. * factory default setting Operating the receiver using a smartphone Saving various settings for the receiver and recalling those settings all at one time (Easy Automation) The items for which you can save settings and the default values for each item are as follows. *You can select Tuner Preset only when FM, AM, or SIRIUS is selected for Input. 1 2 1 2 3 Recall the settings saved to the Scene Save the settings to a Scene Page 1 2 3 4 5 1 2 Recording with an audio equipment Switching the command mode of the receiver 1 2 3 Switching the command mode of the multifunction remote control Switching the command mode of the simple remote control Using a bi-amplifier connection To connect speakers To set up speakers Using the setting menu 1 2 3 To return to the previous screen Setting menu list Page Easy Setup Speaker Settings Position Auto Calibration Auto Calibration Setup 1 2 To set the reference value when you select Front Reference for the Calibration Type 1 2 To customize the frequency for the User Reference 1 2 To set the pair match mode for the Auto Calibration EQ pattern 1 2 To name the Position 1 2 3 4 Automatic Phase Matching Speaker Relocation xType A xType B Speaker Connection Speaker Setup Test Tone 3 To output the source sound from adjacent speakers 1 2 3 Center Analog Down Mix Speaker Impedance Distance Unit Audio Settings xAuto 1 Dual Mono Sound Optimizer xAuto 2 Dynamic Range Compressor A/V Sync (Synchronizes audio and video output) Decode Priority (Digital audio input decoding priority) Sound Field Sound Field Mode Video Settings xDirect Lets you output analog video input signals directly. x1080p Resolution (Converting video signals) Zone Resolution This function targets content via a USB device, a home network, and Internet video. x1080p Playback Resolution x16:9 x4:3 xOriginal xFixed Aspect Ratio HDMI Settings x0 dB Audio Out Screen Format x+10 dB H.A.T.S. xAMP Pass Through Stream information about the H.A.T.S. function available Control for HDMI Input Settings xWatch/Listen xIcon xName xHDMI Network Settings xRenderer Name xAuto Access Permission Internet Services Settings Internet Settings Zone Settings Zone Control To turn the power on or off for zone 2/zone 3 Internet Video Unrated 1 Zone Setup 1 2 3 Line Out xFixed xVariab le System Settings 1 Software Update Notification 2 To update the receiver Network Update Operating without using the GUI 1 2 Initialize Personal Information System Information EULA Using the menu in the display window Page Menu list (in the display window) Page Page Page Page To change the display 1 2 Using the Remote Control Operating each equipment using the remote control continued zz z z z z zc) zz zz z z z z z z z Turning off all connected equipment (SYSTEM STANDBY) Programming the remote 1 SET UP. 2 flashing, press the input button (including the TV button) of the equipment you want to control. 3 enter the numeric code. To cancel programming To control a DVD/VCR COMBO (recorder) To control a HDD/DVD COMBO (recorder) To control a TV Using the Remote Control To control an LD player To control a video CD player To control a VCR continued To control a satellite tuner (box) To control a cable box Performing several commands in sequence automatically (Macro Play) 1 2 3 4 5 1 2 To erase a programmed macro 1 2 Setting remote control codes that are not stored in the remote control 1 2 3 4 5 control to be learned from to transmit the remote control code. 6 learning function process. To cancel learning Page Precautions Additional Information On safety On power sources On heat buildup Troubleshooting Video General Page Audio Page Page Tuner USB device iPhone/iPod Network Internet video BRAVIA Sync (Control for HDMI) Remote control Error messages Message list after Auto Calibration measurement Reference sections To clear the memory of the simple remote control Specifications AUDIO POWER SPECIFICATIONS Clearing the memory Rebooting the receiver About support information Inputs (Analog) Inputs (Digital) Outputs FM tuner section AM tuner section Additional Information Playable types of files General Supplied accessories Design and specifications are subject to change without notice. Standby power consumption 0.5 W. Index