6 Press X/x to select the preset number you want.7 Press ENTER.The station is stored.8 Repeat 1 to 7 to store other stations.To change the preset numberRestart from Step 1.To change the AM tuning interval (except for Middle Eastern model)The AM tuning interval can be set to either 10 kHz or 9 kHz.

To change the AM tuning interval, first tune in any AM station, then turn off the system by pressing "/1 on the system. While holding down

>(on the system), press "/1 on the system to turn on the power. If you change the interval, AM preset stations will be erased.

To reset the interval, repeat the same procedure.Listening to the radio

Preset radio stations in the system’s memory first (see “Presetting radio stations” (page 68)).

1 Press FUNCTION repeatedly until “FM”or “AM” appears in the front panel display.The last received station is tuned in.2 Press PRESET + or – repeatedly to select the preset station you want.Each time you press the button, the system tunes in one preset station.
Each time you press TUNER/BAND, the band changes between FM and AM.3 Adjust the volume by pressing VOLUME +/–.To turn off the radio

Press "/1.

To listen to non-preset radio stations
Use manual or automatic tuning in Step 2.

 

For manual tuning, press TUNING + or –

 

 

repeatedly.

 

 

For automatic tuning, press and hold TUNING +

Other

or –. Press x when you stop the automatic

 

tuning.Operations

 

 

 

will be no stereo effect, but the reception will
• If an FM program is noisy, press FM MODE so that

 

“MONO” appears in the front panel display. There

 

improve. Press the button again to restore the stereo

 

effect.

 

• To improve reception, reorient the supplied antennas

 

(aerials).

 

• You can check the frequency by pressing DISPLAY

 

repeatedly (page 51).

 

Naming preset stations

You can enter a name for preset stations. These names (for example, “XYZ”) appear in the system’s front panel display when a station is selected.

Note that no more than one name can be entered for each preset station.

1 Press FUNCTION repeatedly until “FM”

or “AM” appears in the front panel display.

The last station you received is tuned in.

2 Press PRESET + or – repeatedly to select the preset station you want to create an index name for.

3 Press TUNER MENU.4 Press C/X/x/c repeatedly until “NAMEIN” appears in the front panel display.

continued

69GB