Sony DAV-DX170, DAV-DX250 73US, x[4:3 OUTPUT], x[BLACK LEVEL], x[BLACK LEVEL (COMPONENT OUT)], COMPONENT VIDEO OUT

x[BLACK LEVEL]

Selects the black level (setup level) for the video signals output from the jacks other than

COMPONENT VIDEO OUT.

16:9 aspect ratio TV

[ON]	Sets the black level of the output
	signal to the standard level.
[OFF]	Lowers the standard black level.
	Use this when the picture becomes
	too white.

x[BLACK LEVEL (COMPONENT OUT)]

Selects the black level (setup level) for the video signals output from the COMPONENT VIDEO OUT jacks.

You cannot select this and the setting is not effective when the system outputs progressive signal.

[OFF]	Sets the black level of the output
	signal to the standard level.
[ON]	Raise the standard black level.
	Use this when the picture becomes
	too black.

x[4:3 OUTPUT]

This setting is effective only when you set [TV TYPE] in [SCREEN SETUP] to [16:9] (page 72). Adjust this to watch 4:3 aspect ratio progressive signals. If you can change the aspect ratio on your progressive format (525p/625p) compatible TV, change the setting on your TV, not the system.

Note

•This setting is effective only when “P AUTO (PROGRESSIVE AUTO)” or “P VIDEO (PROGRESSIVE VIDEO)” is selected by using PROGRESSIVE (page 22).

[FULL]	Select this when you can change
	the aspect ratio on your TV.
[NORMAL]	Select this when you cannot
	change the aspect ratio on your
	TV. Shows a 16:9 aspect ratio
	signal with black bands on left and
	right sides of the image.

Adjustments and Settings

73US