Step 4: Performing the Quick Setup

Follow the steps below to make the minimum number of basic adjustments for using the system.

"/1

C/X/x/c

ENTER

DISPLAY

1 Turn on the TV.2 Press [/1.

Note

Disconnect the headphones when you perform the Quick Setup. You cannot operate steps after 8 with the headphones connected.

Make sure that the function is set to “DVD.”

3 Switch the input selector on your TV so that the signal from the system appears on the TV screen.

[Press [ENTER] to run QUICK SETUP.] appears at the bottom of the screen. If this message does not appear, display the Quick Setup and perform again (page 21).

4 Press ENTER without inserting a disc.

The Setup Display for selecting the language used in the on-screen display appears.

LANGUAGE SETUP

OSD:ENGLISH

MENU:ENGLISH

AUDIO:FRENCH

SUBTITLE:SPANISH

PORTUGUESE

5 Press X/x to select a language.The system displays the menu and subtitles in the selected language.6 Press ENTER.

The Setup Display for selecting the aspect ratio of the TV to be connected appears.

 

SCREEN SETUP

 

 

 

 

TV TYPE:

 

16:9

 

 

SCREEN SAVER:

 

16:9

 

 

BACKGROUND:

4:3 LETTER BOX

 

 

BLACK LEVEL:

4:3 PAN SCAN

 

 

BLACK LEVEL (COMPONENT

OUT):

OFF

 

 

4:3 OUTPUT:

 

FULL

 

 

 

 

 

 

 

 

 

 

7 Press X/x to select the setting that matches your TV type.xIf you have a 4:3 standard TV[4:3 LETTER BOX] or [4:3 PAN SCAN] (page 72)xIf you have a wide-screen TV or a 4:3 standard TV with a wide-screen mode[16:9] (page 72)8 Press ENTER.The Setup Display for selecting the speaker formation appears.

9 Press C/c to select the speaker formation image as the speakers are actually positioned, then press ENTER.

For details, see “Getting Optimal Surround Sound for a Room” (page 66).

SPEAKER FORMATION

STANDARD

continued

– BASIC – Started Getting

19GB