Press AMP MENU.

Enjoying the Radio or Other Components

FUNCTION

AMP MENU

X/x/c

ENTER

Selecting the connected component

You can use a VCR or other components connected to the TV/VCR jacks on the rear panel. Refer to the operation manual supplied with the components for further information on the operation.

Press FUNCTION repeatedly until “TV/ VCR” appears in the front panel display.

Each time you press FUNCTION, the mode of the system changes in the following sequence.

DVD t TUNER FM t TUNER AM t TV/VCR t AUDIO t Changing the input level of the sound from connected components

Distortion may occur when listening to a component connected to the TV/VCR jacks on the rear of the unit or to the AUDIO IN jack on the front panel. This is not a malfunction and will depend on the component connected.

To prevent this, you can change the input level from the sound of the other components.

1 Press FUNCTION repeatedly until “TV/ VCR” or “AUDIO” appears in the front panel display.

2

3 Press X/x repeatedly until “ATTENUATE” appears in the front panel display, then press ENTER or c.

4 Press X/x to select a setting.ATT ON: attenuates the input level. The output level is changed.ATT OFF: normal input level.5 Press ENTER.

The setting is reflected.

6 Press AMP MENU.

The AMP menu turns off.

Operations Basic

31GB