x[MULTI-DISC RESUME] (DVD VIDEO/ VIDEO CD only)

Switches the Multi-disc Resume setting on or off.

[ON]

Stores the resume settings in

 

memory for up to 40 discs.

 

 

[OFF]

Does not store the resume settings

 

in memory. Playback restarts at

 

the resume point only for the

 

current disc in the system.

 

 

x[AUDIO DRC] (DVD VIDEO only)

Narrows the dynamic range of the sound track. Useful for watching movies at low volume late at night.

[OFF]

No compression of dynamic

 

range.

 

 

[STANDARD]

Reproduces the sound track with

 

the kind of dynamic range that the

 

recording engineer intended.

 

 

[MAX]

Compresses dynamic range fully.

 

 

x[AUDIO (HDMI)]

Selects the type of audio signal output from the HDMI OUT jack.

[OFF]

The sound is not output from the

 

HDMI OUT jack.

 

 

[AUTO]

Outputs audio signals that is

 

matched to the requested audio

 

stream from the connected TV.

 

 

[PCM]

Converts Dolby Digital, DTS

 

(digital theater system), or 96

 

kHz/24 bit PCM (pulse code

 

modulation) signals to 48 kHz/ 16

 

bit PCM (pulse code modulation).

 

 

Note

•A loud noise (or no sound) will be output if you connect the system to a TV that is not compatible with DOLBY DIGITAL/DTS (digital theater system) signals and [AUTO] is selected. In this case, select [PCM].

•When you connect the system and TV with the HDMI cord and [AUTO] or [PCM] is selected, DYNAMIC BASS, MOVIE/MUSIC, and sound field are not applied to the sound that is output from the TV.

Settings for the Speakers

[SPEAKER SETUP]

To obtain the best possible surround sound, set for the size of the speakers you have connected and their distance from your listening position. Then use the test tone to adjust the level and the balance of the speakers to the same level.

Select [SPEAKER SETUP] in the Setup Display. For details, see “Using the Setup Display” (page 71).

The default settings are underlined.

Note

•You cannot operate these setup items when you connect headphones to the system.

SPEAKER SETUP

SIZE:

DISTANCE(FRONT):

DISTANCE(SURROUND):

LEVEL(FRONT):

LEVEL(SURROUND):

TEST TONE: OFF

FRONT:YES

CENTER:YES

SURROUND:YES

SUBWOOFER:YES

To return to the default setting when changing a setting

Select the item, then press CLEAR. Note that only the [SIZE] setting does not return to the default setting.

x[SIZE]

If you do not connect center or surround speakers, or move the surround speakers, set the parameters for [CENTER] and [SURROUND] and specify the surround speaker position. Since the front speaker and subwoofer setting is fixed, you cannot change them.

[FRONT] [YES]

[CENTER] [YES]: Normally select this. [NONE]: Select this if no center speaker is used.

[SURROUND] [YES]: Normally select this. [NONE]: Select this if no surround speaker is used.

[SUBWOOFER] [YES]

76US