Sony DAV-DZ210D 53GB, Tuner, you want, 3 Press MENU, 5 Press ENTER, 7 Press ENTER, Presetting DAB stations, Listening to a DAB station, To change the preset number, display

but “%” does not appear in the front panel display). Depending on the DAB services available in your area, this may take a few minutes.

When scanning is complete, “COMPLETE” appears in the front panel display momentarily and an available service component list is created.

Note

•If your country or region does not support DAB broadcast, “NO SERVICE” appears.

•Do not press any button on the unit or remote during DAB INITIAL SCAN. Scanning is interrupted and service component list may not be created properly. In this case, perform DAB INITIAL SCAN again.

•If you move to another area, repeat this procedure to store the stations for your new area.

•This procedure clears all previously stored presets.•This procedure does not create any presets.Listening to a DAB station

1 Press FUNCTION repeatedly until “DAB” appears in the front panel display.

The last received station is tuned in.

2 Press TUNING + or – repeatedly to select a station you want.

For continuous tuning, press and hold TUNING + or –, then to release the button to select the station you want.

When the system tunes in a station, “TUNED” and “ST” (for stereo program or joint (intensity) stereo program) appear in the front panel display.

3 Adjust the volume by pressing VOLUME +/–.

Note

•You cannot select a DAB station by the D.TUNING button and number buttons (direct tuning).

•When tuning in a DAB station, it may take a few seconds before you hear any sound.

•Primary service is automatically received when secondary service ends.

Presetting DAB stationsYou can preset 30 DAB stations.

1 Press FUNCTION repeatedly until “DAB” appears in the front panel display.

The last received station is tuned in.

2 Tune in the station you want to preset.

3 Press MENU.

4 Press X/x repeatedly until “MEMORY”

appears in the front panel display.

5 Press ENTER.

A preset number appears in the front panel

	display.	Tuner
6		Functions
	Press X/x to select the preset number

you want.

7 Press ENTER.

The station is stored.

8 Repeat 1 to 7 to store other stations.

To change the preset number

Restart from Step 1.

Note

•You cannot preset the service component while “TUNED” is not displayed.

continued

53GB