Listening to a DAB station by using a preset number

Preset DAB radio stations in the system’s memory first (see “Presetting DAB stations” (page 53)).

1 Press FUNCTION repeatedly until “DAB” appears in the front panel display.

The last received station is tuned in.

2 Press PRESET + or – repeatedly to select the preset station you want.

Each time you press the button, the system tunes in one preset station. You can also select the number by pressing the number buttons. Press the number buttons, and then press ENTER.

3 Adjust the volume by pressing VOLUME +/–.

Note

•If there is no stored preset station, or no registered preset number, “NO PRESET” appears in the front panel display.

•Primary service is automatically received when secondary service ends.

Viewing the DAB station information in the front panel displayPress DISPLAY repeatedly.

Each time you press DISPLAY while tuning in a DAB station, the display changes 1t 2t

... t 1 t ...1Service component label2 Dynamic label segment1)3 Channel label and frequency2)4 Preset number2)3)

1)If a station does not provide the Dynamic label segment, “NO TEXT” is displayed.

2)Returns to the service component label after about 4 seconds.

3)If the currently received station is not preset, this is skipped.

Note

•If tuning a DAB station, the following appears in the front panel display:

–“OTHER LANG” is displayed when the system does not support the language.

–All text is displayed in capital letters.

–A character which cannot be displayed is replaced by a blank space.

•When “ST” appears in the front panel display, the current program is broadcasted in the stereo/joint (intensity) stereo mode.

54GB