Press ENTER.
Press MENU.
Naming preset stations

You can enter a name for preset stations. These names (for example, “XYZ”) appear in the system’s front panel display when a station is selected.

Note that no more than one name can be entered for each preset station.

Note

•You cannot enter a name for preset stations of the Radio Data System (RDS) (page 52).

1 Press FUNCTION repeatedly until “TUNER FM” or “TUNER AM” appears in the front panel display.

The last received station is tuned in.

2 Press PRESET + or – repeatedly to select the preset station you want to create an index name for.

3

4 Press X/x repeatedly until “NAME IN” appears in the front panel display.

5

6 Create a name by using the cursor buttons.

Press X/x to select a character, then press c to move the cursor to the next position. Letters, numbers, and other symbols can be input for a radio station name.

If you make a mistake

Press C/c repeatedly until the character to be changed flashes, then press X/x to select the desired character.

To erase the character, press C/c repeatedly until the character to be erased flashes, then press CLEAR.

7 Press ENTER.

“COMPLETE” appears in the front panel display, and the station name is stored.

Tip

•You can check the frequency by pressing DISPLAY repeatedly (page 51).

Viewing the station name or frequency in the front panel display

When the system is set to “TUNER AM” or “TUNER FM,” you can check the frequency using the front panel display.

Press DISPLAY.

Each time you press DISPLAY, the display changes as shown.1 Station name*2 Frequency**

* This is displayed if you have entered a name for a preset station.

** Returns to the original display when several seconds

has elapsed. TunerFunctions
51GB