Sony DAV-DZ250M Playing Discs, 24GB, 4 Press A, 6 Press H, 3 Press "/1, 5 Load a disc, Basic Operations, Basic Operations, 1 Turn on your TV, Additional operations

Basic Operations

Basic Operations

Playing Discs

"/1 A H FUNCTION

Disc tray	Adjust the
	volume

Z "/1

FUNCTION

MUTING

VOLUME +/–

./>

/

H

x

X

Depending on the DVD VIDEO or VIDEO CD, some operations may be different or restricted. Refer to the operating instructions supplied with your disc.

1 Turn on your TV.2 Switch the input selector on the TV to this system.3 Press "/1.The system turns on.Unless the system is set to “DVD,” press FUNCTION to select “DVD.”4 Press A.5 Load a disc.Place one disc on the tray, and then press A.

Note

•When you play an 8 cm disc, place it on the inner circle of the tray. Be careful that the disc is not skewed on the inner circle of the tray.

•Do not forcibly press the disc tray closed with your finger, as this may cause malfunction.

•Do not place more than one disc on the tray.

6 Press H.The system starts playback (continuous play).Adjust the volume on the unit.The volume level appears on the TV screen and in the front panel display.

Note

•Depending on the system status, the volume level may not appear on the TV screen.

•When you set the HDMI CONTROL function to on (page 73), the TV that is connected to the system with the HDMI cord can be synch-operated with the system. For details, see the HDMI CONTROL Guide (supplied separately).

Tip

•When you connect the system and TV with the HDMI cord, you can operate them simply, using the HDMI CONTROL function. For details, see the HDMI CONTROL Guide (supplied separately).

To save the power in standby modePress "/1 while the system turns on. To cancel standby mode, press "/1 once.Additional operations

To	Press
Stop	x
Pause	X
Resume play after pause	X or H
Go to the next chapter,	> (except for JPEG)
track, or scene

24GB