Sony DAV-DZ30, 3-283-028-11(1) 10GB, Required cords, 1Connecting the Speakers, Getting Started – BASIC –, To avoid short-circuitingthe speakers

Getting Started – BASIC –

1Connecting the SpeakersRequired cords

The connector and color tube of the speaker cords are the same color as the label of the jacks to be connected.

Gray

To the SPEAKER jack		(+)
	Color tube	(–)
		Black

Note

• Do not catch the speaker cord insulation in the SPEAKER jack.

To avoid short-circuiting the speakers

Short-circuiting of the speakers may damage the system. To prevent this, be sure to follow these precautions when connecting the speakers. Make sure the bare wire of each speaker cord does not touch another speaker terminal or the bare wire of another speaker cord, such as shown below.

Stripped speaker cord is touching	Stripped cords are touching each other
another speaker terminal.	due to excessive removal of insulation.

After connecting all the components, speakers, and AC power cord (mains lead), output a test tone to check that all the speakers are connected correctly. For details on outputting a test tone, see page 64. If no sound is heard from a speaker while outputting a test tone, or a test tone is output from a speaker other than the one currently displayed on the Setup Display, the speaker may be short-circuited. If this happens, check the speaker connection again.

Note

•Be sure to match the speaker cord to the appropriate terminal on the components: 3 to 3, and # to #. If the cords are reversed, the sound will lack bass and may be distorted.

10GB