Installing the Speakers on a Wall

You can use the speakers by installing on the wall.Installing the speakers on a wall

1 Prepare screws (not supplied) that are suitable for the hole on the back of each speaker. See the illustrations below.

4 mm (5/32 inch)

30 mm (1 3/16 inches)

Hole on the back of

57mm the speaker ( /32 inch)

10 mm

(13/32 inch)

2 Fasten the screws to the wall.

For the center speaker

160 mm

(6 5/16 inches)

7 to 9 mm

(9/32 to 3/8 inch)

For the other speakers

6 to 9 mm (1/4 to 3/8 inch)

3 Hang the speakers on the screws.

5 mm

(7/32 inch)

10 mm

(13/32 inch)

Rear of speaker

Note

•Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach the screws securely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where reinforcement is applied.

•Contact a screw shop or installer regarding the wall material or screws to be used.

•Sony is not responsible for accident or damage caused by improper installation, insufficient wall strength or improper screw installation, natural calamity, etc.

– ADVANCED – Started Getting
17GB