component that is connected to the AUDIO IN jack on the front panel.

To prevent this, you can change the output level of the sound from the AUDIO IN jack on the front panel.

1 Press AMP MENU.

2 Press X/x repeatedly until “AUDIO

ATT” appears in the front panel display, then press ENTER or c.

3 Press X/x repeatedly until “ATT ON” appears in the front panel display.

The output level is changed.When you select “ATT OFF” and press x, this operation will be canceled.

4 Press ENTER or AMP MENU.

The AMP menu turns off.

Enjoying Multiplex

Broadcast Sound

(DUAL MONO)

You can enjoy multiplex broadcast sound when the system receive the AC-3 multiplex broadcast signal.

Note

•To receive the AC-3 signal, you need to connect a digital satellite tuner to the system with an optical cable or coaxial cable (page 31) and set the digital output mode of the digital satellite tuner to AC-3.

AMP MENU

X/x/c

ENTER

1

2

3

Press AMP MENU.

Press x/X repeatedly until “DUAL

MONO” appears in the front panel display, then press ENTER or c.

Press x/X to select the sound you want.

•MAIN: main sound is output from the left and right speakers.•SUB: sub sound is output from the left and right speakers.

•MAIN+SUB: main sound and Sub sound are output from the left and right speakers.

•MAIN/SUB: main sound is output from the left speaker and Sub sound is output from the right speaker.

4 Press ENTER or AMP MENU.

The AMP menu turns off.

78GB