Manuals / Brands / Home Audio / Home Theater System / Sony / Home Audio / Home Theater System

Sony DAV-DZ810W 18GB, Getting Started – BASIC –, To connect the FM wire antenna (aerial), 4Connecting the AC power cord (mains lead)

1 112

Download 112 pages, 1.55 Mb

Getting Started – BASIC –

To connect the FM wire antenna (aerial)Connect the FM wire antenna (aerial) to the COAXIAL FM 75 Ω jack.

FM wire antenna (aerial)	FM wire antenna (aerial)
(supplied)	(supplied)
	or
COAXIAL FM 75 Ω jack	COAXIAL FM 75 Ω jack

Note

•Be sure to fully extend the FM wire antenna (aerial).

•After connecting the FM wire antenna (aerial), keep it as horizontal as possible.

Tip

•If you have poor FM reception, use a 75-ohm coaxial cable (not supplied) to connect the system to an outdoor FM antenna (aerial) as shown below.

System

Outdoor FM antenna (aerial)

4Connecting the AC power cord (mains lead)

Before connecting the AC power cord (mains lead) of this system to a wall outlet (mains), connect the speakers to the system.

Install this system so that the power cord can be unplugged from the wall socket immediately in the event of trouble.

18GB

Contents

Page Welcome Table of Contents This System Can Play the Following Installing the Speakers and the IR transmitter on a Wall Enjoying Multiplex Broadcast Sound Changing the Brightness of the Front (CUSTOM PARENTAL CONTROL, PARENTAL CONTROL) Getting Optimal Surround Sound for a About This Manual This System Can Play the Following Discs Example of discs that the system cannot play The system cannot play the following discs: •CD-ROMs/CD-Rs/CD-RWsother than those recorded in the formats listed on page •CD-ROMsrecorded in PHOTO CD format •Data part of CD-Extras Note on playback operations of DVDs and VIDEO CDs Copyrights Getting Started – BASIC – See Unpacking in Specifications, page Inserting batteries into the remote Attaching the foot pads to the subwoofer Step 1: Assembling the Speakers and Installing the Surround Amplifier 5 Secure the pedestal to the post with the screws 10GB 11GB 8 Slide the speaker down slowly onto the pedestal 9 Secure the speaker with the screws in order 1 to Installing the surround amplifier (speaker base) 12GB 1 Attach the spacers 13GB 14GB Step 2: Connecting the System and TV 1Connecting the Speakers Required cords To avoid short-circuitingthe speakers 2Connecting the TV SCART (EURO AV) cord (not supplied) 3Connecting the Antenna (Aerial) To connect the AM antenna (aerial) 3 Connect the cords to the AM antenna (aerial) terminals Cord (A) or cord (B) can be connected to either terminal 4 Make sure the AM loop antenna (aerial) is connected firmly by pulling softly To connect the FM wire antenna (aerial) Connect the FM wire antenna (aerial) to the COAXIAL FM 75 Ω jack 4Connecting the AC power cord (mains lead) 18GB Step 3: Positioning the System Step 4: Performing the Quick Setup • [RGB]: outputs RGB signals 10 Press The Setup Display for selecting the speaker formation appears For details, see “Getting Optimal Surround Sound for a Room” (page 74) A.CAL MIC Auto Calibration starts To quit the Quick Setup Press DISPLAY in any Step If you change the position of the speakers, reset the speaker settings. See If you want to change any of the settings, see To recall the Quick Setup display To place the surround speaker (L) in the (R) position (L)(with the IR receiver) in the (R) position if necessary 1Press AMP MENU 2Press X/x repeatedly until “SL SR REV” appears in the front panel display, then press or c Turning off the Demonstration Installing the Speakers and the IR transmitter on a Wall 3Hang the IR transmitter via hole on the bottom of the stand on the screw Make sure that the IR transmitter does not move after installation •You can store the cords in the troughs in the bottom of the stand •Use screws suitable for the material and strength of the wall 26GB TV Hookup (Advanced) ATo connect to a TV with the SCART (EURO AV) cord (not supplied) BTo connect to a TV with the COMPONENT VIDEO IN jacks To connect to a TV with the HDMI When connecting to a standard 4:3 screen TV 28GB Does your TV accept progressive signals 1 Press FUNCTION +/– repeatedly to select “DVD.” 2 Press PROGRESSIVE xP AUTO (PROGRESSIVE AUTO) xP VIDEO (PROGRESSIVE VIDEO) xINTERLACE –your TV does not accept progressive signals, or your TV is connected to jacks other than the COMPONENT VIDEO OUT jacks (EURO AV About DVD software types and the conversion method 30GB Other Component Hookup If you connect a digital satellite receiver without an DIGITAL OUT jack Connect the digital satellite receiver to the LINE1 jacks only of the system 32GB Playing Discs Basic Operations Enjoying the Radio or Other Components Selecting the connected component Press FUNCTION +/– repeatedly until “LINE1” appears in the front panel display DVD t TUNER FM t TUNER AM t LINE1 t LINE2 t TV t AUDIO t … 34GB Enjoying TV or VCR Sound from All Speakers Selecting the Movie or Music Mode Enjoying Surround Sound by Using Sound Field Press SOUND FIELD All sound field Automatic outputting of the original sound xAUTO FORMAT DIRECT STANDARD Enjoying Digital Cinema Sound About DCS (Digital Cinema Sound) xCINEMA STUDIO EX A (Cinema Studio EX A) xCINEMA STUDIO EX B (Cinema Studio EX B) xCINEMA STUDIO EX C (Cinema Studio EX C) Enjoying Multiplex Broadcast Sound (DUAL MONO) Searching for a Particular Point on a Disc (Scan, Slow-motionPlay, Freeze Frame) Searching for a Title/ Chapter/Track/Scene, etc Searching by Scene (Picture Navigation) Resuming Playback from the Point Where You Stopped the Disc (Resume Play) Creating Your Own Program (Program Play) Playing in Random Order (Shuffle Play) Playing Repeatedly (Repeat Play) Using the DVD’s Menu Changing the Sound Checking the audio signal format (DVD, DivX video only) xWhen playing a DVD Example: About audio signals the Disc DVD-RW When playing a DATA CD (MP3 audio) or DATA DVD (MP3 audio) 1Playing time and current track number 2 Track (file) name Checking the playing time and remaining time 2 Press DISPLAY repeatedly to change the time information Checking the play information of the disc To check DVD/Super Audio CD/CD text To check DATA CD/DATA DVD (MP3 audio/DivX video) text Checking the date information (JPEG only) Changing the Angles Displaying the Subtitles Adjusting the Delay Between the Picture and Sound (A/V SYNC) Selecting a Playback Area for a Super Audio CD About MP3 Audio Tracks and JPEG Image Files •which conform to the DCF* image file format •The system does not conform to audio in MP3PRO format Playback order of MP3 audio tracks or JPEG image files xStructure of disc contents . Albums that do not contain tracks (or files) (such as album ) do not appear in the list 56GB Playing DATA CDs or DATA DVDs with MP3 Audio Tracks and JPEG Image Files Press C/X/x/c to select the image you want to view and press To play the next or previous JPEG image file To rotate a JPEG image Example of when you press X once: Press CLEAR to return to normal view 58GB Playing Audio Tracks and Images as a Slide Show with Sound • [NORMAL]: sets the duration to about • [MODE4]: The images randomly cycle to 9 seconds. (Images that are four million through the effects Selecting an effect for image files in the slide show Press DISPLAY twice Press X/x to select [EFFECT], then press The options for [EFFECT] appear 60GB Enjoying DivX® Videos To go to the next or previous page Press C/c Selecting a DivX video file 1 After Step 2 of “Selecting an album,” press The list of files in the album appears (PBC Playback) Presetting Radio Stations Listening to the Radio Press MENU Naming preset stations Note that no more than one name can be entered for each preset station 4 Press X/x repeatedly until “NAME IN” appears in the front panel display 6 Create a name by using the cursor buttons Using the Radio Data System (RDS) Controlling the TV with the Supplied Remote Using the THEATRE SYNC Function Using the Sound Effect Using the Sleep Timer Changing the Brightness of the Front Panel Display Locking Discs (CUSTOM PARENTAL CONTROL, PARENTAL CONTROL) To play a disc for which Custom Parental Control is set 1Insert the disc for which Custom Parental Control is set The [CUSTOM PARENTAL CONTROL] display appears 2Enter your 4-digitpassword using the number buttons, then press The system is ready for playback 5 Press X/x to select [STANDARD], then press The selection items for [STANDARD] are displayed The area is selected 7 Press X/x to select [LEVEL], then press The selection items for [LEVEL] are displayed (SPEAKER FORMATION) cords and surround speakers using the wireless system •[NO CENTER]: when installing the front and surround speakers •[NO SURROUND]: when installing the center and front speakers •[FRONT ONLY]: when installing the front speakers Adjustments and Settings Advanced 75GB Calibrating the Appropriate Settings Automatically (AUTO CALIBRATION) 5 Press X/x to select [YES], then press Calibration starts 6 Press C/X/x/c to select [YES] or [NO], then press xThe measurement is OK Disconnect the calibration mic, then select [YES]. The result is implemented Using the Setup Display [LANGUAGE SETUP] Settings for the Display [SCREEN SETUP] x[YCBCR/RGB (HDMI)] Selects the type of HDMI signal output from HDMI OUT jack x[SCREEN SAVER] x[BACKGROUND] DATA DVD Custom Settings [CUSTOM SETUP] Settings for the Speakers [SPEAKER SETUP] x[DISTANCE (FRONT)] Be sure to change the value in the Setup Display when you move the speakers x[DISTANCE (SURROUND)] x[LEVEL (FRONT)] 84GB x[LEVEL (SURROUND)] To adjust the volume of all the speakers at one time Turn the VOLUME control on the system, or press VOLUME +/– on the remote x[TEST TONE] Adjusting the speaker level by using the test tone Returning to the Default Settings Precautions Notes about the Discs Troubleshooting Picture noise appears Color irregularity occurs on the TV screen Sound There is no sound No sound is output from the HDMI OUT jack Severe hum or noise is heard The sound loses stereo effect when you play a VIDEO CD, a CD, or an MP3 The sound comes from the center speaker only No sound is heard from the center speaker No sound or only a very low-levelsound is heard from the surround speakers The MP3 audio track cannot be played •The MP3 audio track does not have the extension “.MP3.” •The data is not formatted in MP3 even though it has the extension “.MP3.” •The data is not MPEG1 Audio Layer 3 data •The system cannot play audio tracks in MP3PRO format Self-diagnosisFunction (When letters/numbers appear in the display) Specifications Glossary DivX® Dolby Digital xMovie mode xMusic mode Dolby Surround Pro Logic DVD-RW DVD-RW DVD+RW File Film based software, Video based software xTypes of Super Audio CDs •Super Audio CD layer: A high-densitysignal layer for Super Audio CD •CD layer1): A layer that is readable by a conventional CD player A Super Audio CD layer consists of the 2 channel area or the multi-channelarea •2 channel area: An area in which 2 channel stereo tracks are recorded Language Code List Index to Parts and Controls Front panel display About the indications in the front panel display CLights up when a station is received. (Radio only) (64) DMonaural/Stereo effect (Radio only) (64) ELights up when the sleep timer is set. (70) Surround amplifier 101GB Guide to the Control Menu Display 1 2 ( 2 7 ) 1 8 ( 3 4 ) DVD VIDEO 1 : 3 2 : 5 List of Control Menu items Selects the title, scene, or track to be played Selects the chapter or index to be played Displays the index and selects the index to be played Selects the track to be played 104GB DVD Setup Display List You can set the following items with the DVD Setup Display The order of the displayed items may be different from the actual display AMP Menu List You can set the following items with AMP MENU on the remote Index 108GB Page Page Page Remote control Sony Corporation Printed in China