Sony DAV-DZ810W 16GB, Required cords, Required cords, 2Connecting the TV, 1Connecting the Speakers, Getting Started – BASIC –, SCART (EURO AV) cord (not supplied)

Getting Started – BASIC –

1Connecting the SpeakersRequired cords

The connector and color tube of the speaker cords are the same color as the label of the jacks to be connected.

Color tube

(+)

(–)

Note

• Do not catch the speaker cord insulation in the SPEAKER jack.

To avoid short-circuiting the speakers

Short-circuiting of the speakers may damage the system. To prevent this, be sure to follow these precautions when connecting the speakers. Make sure the bare wire of each speaker cord does not touch another speaker terminal or the bare wire of another speaker cord, such as shown below.

Stripped speaker cord is	Stripped cords are touching each
touching another speaker	other due to excessive removal of
terminal.	insulation.

After connecting all the components, speakers, and AC power cord (mains lead), output a test tone to check that all the speakers are connected correctly. For details on outputting a test tone, see page 85. If no sound is heard from a speaker while outputting a test tone, or a test tone is output from a speaker other than the one currently displayed on the Setup Display, the speaker may be short-circuited. If this happens, check the speaker connection again.

Note

•Be sure to match the speaker cord to the appropriate terminal on the components: 3 to 3, and # to #. If the cords are reversed, the sound will lack bass and may be distorted.

2Connecting the TV

Required cords

SCART (EURO AV) cord (not supplied)

.

Be sure to connect the SCART (EURO AV) cord to the EURO AV T OUTPUT (TO TV) jack on the system.

When you connect using the SCART (EURO AV) cord, check that the TV conforms to S video or RGB signals. If the TV conforms to S video, change the input mode of the TV to RGB signals. Refer to the operating instructions supplied with the TV to be connected.

16GB