“RESUME” appears in the front panel display.

2 Press H.

The system starts playback from the point where you stopped the disc in Step 1.

Note

•Depending on where you stop the disc, the system may not resume playback from exactly the same point.

•The point where you stopped playing may be cleared when:

–you eject the disc.

–the system enters standby mode (DATA CD/ DATA DVD only).

–you change or reset the settings on the Setup Display.

–you change the parental control level.

–you change the function by pressing FUNCTION +/–.

–you disconnect the AC power cord (mains lead).

•For a DVD-VR, VIDEO CD, Super Audio CD, CD, DATA CD, or DATA DVD, the system remembers the resume playback point for the current disc.

•Resume Play does not work during Program Play and Shuffle Play.

•This function may not work properly with some discs.

Tip

•To play from the beginning of the disc, press x twice, then press H.

To enjoy a disc that is played before by resume playback(Multi-disc Resume)

This system recalls the point where you stopped the disc the last time it was played and resumes playback from that point the next time you insert the same disc. When the resume playback memory is full, the resume playback point for the earliest disc is deleted.

To activate this function, set [MULTI-DISC RESUME] in [SYSTEM SETUP] to [ON]. For details, see “[MULTI-DISC RESUME] (DVD VIDEO/VIDEO CD only)” (page 61).

Note

•This system can store at least 10 resume playback points.

•If [MULTI-DISC RESUME] in [SYSTEM SETUP] is set to [OFF] (page 61), the resume point is cleared when you change the function by pressing FUNCTION +/–.

Tip

• To play from the beginning of the disc, press x twice, then press H.

Disc

43GB