Identifying the unit with a specific S-AIR sub unit (Pairing operation)

For the surround amplifier

For the S-AIR receiver

It is easy to set the same ID for the unit and an S-AIR sub unit, such as a surround amplifier or S-AIR receiver, to establish sound transmission. However, neighbors may also receive your system’s sound if IDs are the same, or you may receive the sound from neighbors. To prevent this, you can identify the unit with a specific S-AIR sub unit by performing the pairing operation.

xBefore pairing

Sound transmission is established by the ID (example).

Your room

Neighbor

This unit

ID A

 

ID A

 

 

ID A

 

 

 

 

 

 

 

S-AIR sub unit

S-AIR sub unit

xAfter pairing

Sound transmission is established between the paired unit and S-AIR sub unit(s) only.

Your room

Neighbor

This unit

ID A

No transmission

 

ID A

 

 

ID A

 

 

 

 

 

 

 

S-AIR sub unit

S-AIR sub unit

Pairing

To perform pairing1 Place the S-AIR sub unit that you want to pair near the unit.

•Remove headphones from the surround amplifier (if connected).

2 Match the IDs of the unit and the S-AIR sub unit.

•To set the ID of the unit, see “To set the ID of the unit” (page 81).

•To set the ID of the surround amplifier, see “To set the ID of the surround amplifier” (page 82).

•To set the ID of the S-AIR receiver, refer to the operating instructions of the S-AIR receiver.

3 Press FUNCTION +/– repeatedly until

“DVD” appears in the front panel display.

4 PressDISPLAY while the system is in stop mode.

The Control Menu display appears on the TV screen.

5 Press X/x to select [SETUP], then press .

The options for [SETUP] appear.

6 Press X/x to select [CUSTOM], then press .

The Setup Display appears.

84GB