Sound transmission is established as follows (example):

This unit

 

Other S-AIR main

 

unit

ID A

 

ID B

 

 

 

 

 

ID A

 

 

ID A

 

ID B

 

 

 

 

 

 

 

 

S-AIR sub unit

S-AIR sub unit

S-AIR sub unit

Tip

•To confirm the current ID, perform Steps 1 to 7 above. When you pair the unit with the S-AIR sub unit (page 84), [(PAIRING)] appears beside ID on the display for selecting ID.

To set the ID of the surround amplifier

1 Make sure that the SURROUND SELECTOR switch of the surround amplifier is set to SURROUND.

2 Set the S-AIR ID switch of the surround amplifier to match the ID (A, B, or C) of the unit.

3 Press POWER on the surround amplifier.

When sound transmission is established, the POWER / ON LINE indicator of the surround amplifier turns green.

For details of the POWER / ON LINE indicator, see “To check the transmission status” (page 27).

To set the ID of the S-AIR receiver

Refer to the operating instructions of the S-AIR receiver.

Note

•It is easy to set the same ID for the unit and S-AIR sub unit to establish sound transmission. However, neighbors may also receive your system’s sound if IDs are the same, or you may receive the sound from neighbors. To prevent this, you can identify the unit

with a specific S-AIR sub unit by performing the pairing operation (page 84).

Enjoying the system’s sound in another room

For the S-AIR receiver

You can enjoy the system’s sound by using the S-AIR receiver. The S-AIR receiver can be installed anywhere, regardless of the location of the unit, for enjoying the system’s sound in another room.

For details of the S-AIR receiver, refer to the operating instructions of the S-AIR receiver.

1 Set the ID of the S-AIR receiver to that of the unit.

•To set the ID of the unit, see “To set the ID of the unit” (page 81).

•To set the ID of the S-AIR receiver, refer to the operating instructions of the S-AIR receiver.

Note

•When you are using another S-AIR sub unit, such as a surround amplifier, do not change the ID of the unit. Set the ID of the S-AIR receiver to the same ID as the unit.

•When you pair the unit and another S-AIR sub unit, such as a surround amplifier, by the pairing operation, you need to perform the pairing operation between the unit and the S-AIR receiver. For details, see “Identifying the unit with a specific S-AIR sub unit (Pairing operation)” (page 84).

2 Press S-AIR MODE on the remote.

The S-AIR mode appears in the front panel display. Each time you press S-AIR MODE, the S-AIR mode changes.

•“PARTY”: The S-AIR receiver outputs sound according to function set on the unit.

•“SEPARATE”: You can set the desired function for the S-AIR receiver while unit functions do not change.

82GB