General Setup Page
x[TV Display]
You can select the aspect ratio of the connected TV.
[16:9]: Select this when you connect a wide- screen TV or a TV with a wide mode function.
[4:3 Letter Box]: Select this when you connect a 4:3 screen TV. Displays a wide picture with bands on the upper and lower portions of the TV screen.
[4:3 Pan Scan]: Select this when you connect a 4:3 screen TV. The system automatically displays the wide picture on the entire screen and cuts off the portions that do not fit.
x[OSD Lang]
You can switch the display language on the TV screen.
x[Control for HDMI]
This function is available when you connect the system and TV that is compatible with the Control for HDMI function with an HDMI cable.
[On]: You can operate mutually between components that are connected with an HDMI cable.
[Off]: Off.
x[Screen Saver]
The screen saver prevents damage to the TV screen by avoiding exposure to a static image for too long.
[On]: Switch to TV screen saver mode when stop, pause, no disc or eject mode for more than 15 minutes.
[Off]: Screen Saver function doesn’t work.
x[Last Memory]
This system recalls the point where you stopped the disc the last time it was played and resumes playback from that point the next time you insert the same disc.
[On]: The system stores the resume points in memory.
[Off]: The system does not store the resume points in memory. Playback restarts at the resume point only for the current disc in the unit.
Note
•When the resume playback memory is full, the resume playback point for the earliest disc is deleted.
x[Auto Standby]
You can set the standby mode.
[On]: Standby automatically when stop, pause, no disc or eject mode for more than 30 minutes. [Off]: Don’t standby automatically.