The default distance setting for the speakers in relation to the listening position is shown below.
| 3m |
| (10ft) |
3m | 3m |
(10ft) | (10ft) |
| 3m |
| 3m | ||
(10ft) | (10ft) | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Be sure to change the value in the Setup Display when you move the speakers.
FRONT Front speaker distance from the
3 m/10 ft listening position can be set in 0.2 metre (1 ft) increments from 1.0 to 7.0 metres (3 to 23 ft).
CENTER Centre speaker distance can be moved
3 m/10 ft up to 1.6 metres (5 ft) forward closer to the listening position, in 0.2 metre (1 ft) increments.
SURROUND Surround speaker distance can be
3 m/10 ft moved up to 4.6 metres (15 ft) closer to your listening position from the front speaker position, in 0.2 metre (1 ft) increments.
Notes
•In SPEAKER SETUP, the North American model’s OSD displays both metric and imperial measurements. The other model displays metric measurements only. The manual shows both.
•When you set the distance, the sound cuts off for a moment.
•If all front and surround speakers are not placed at an equal distance from your listening position, set the distance according to the closest speaker.
•Do not place the surround speakers farther away from your listening position than the front speakers.
•The DISTANCE setting is available except for Super Audio CDs.
You can vary the level of each speaker as follows. Be sure to set “TEST TONE” to “ON” for easy adjustment.
CENTER | Adjusts the level of the centre | |
0 dB | speaker | |
| increments). | |
SURROUND | Adjusts the level of the surround | |
LEFT 0 dB | speakers | |
SURROUND | increments). | |
RIGHT 0 dB | ||
| ||
SUBWOOFER | Adjusts the level of the subwoofer | |
0 dB |
You can vary the balance of the left and right speakers as follows. Be sure to set “TEST TONE” to “ON” for easy adjustment.
FRONT Adjusts the balance between the front left and right speakers.
To adjust the volume of all the speakers at one timeUse the VOLUME control on the system, or press VOLUME
The speakers will emit a test tone to adjust “LEVEL” and “BALANCE.”
OFF The test tone is not emitted from the speakers.
ON The test tone is emitted from each speaker in sequence while adjusting balance or level. When you select one of the “SPEAKER SETUP” items, the test tone is emitted from both left and right speakers simultaneously.
Adjustments and Settings