1.0- 7.0 m/

4 - 23 ft

0.0 - 7.0 m/

0 - 23 ft

Be sure to change the value in the Setup Display when you move the speakers.

[FRONT]

Front speaker distance from the

3.0 m/10 ft*

listening position can be set in 0.2

 

meter (1 ft) increments from 1.0 to

 

7.0 meters (4 to 23 ft).

 

 

[CENTER]

Center speaker distance from the

3.0 m/10 ft*

listening position can be set in 0.2

(appears when

meter (1 ft) increments from 0.0 to

you set

7.0 meters (0 to 23 ft).

[CENTER] to

 

[YES] in the

 

[SIZE] setting.)

 

 

 

[SURROUND]

Surround speaker distance from the

3.0 m/10 ft*

listening position can be set in 0.2

(appears except

meter (1 ft) increments from 0.0 to

when you set

7.0 meters (0 to 23 ft).

[SURROUND]

 

to [NONE] in the

 

[SIZE] setting.)

 

 

 

*When you perform the Quick Setup (page 33), the default settings are changed.

Note

•When you set the distance, the sound cuts off for a moment.

•If all front and surround speakers are not placed at an equal distance from your listening position, set the distance according to the closest speaker.

•Do not place the surround speakers farther away from your listening position than the front speakers.

•Depending on the input stream, the [DISTANCE] setting may not be effective.

x[LEVEL (FRONT)]

You can vary the level of front speakers as follows. Be sure to set [TEST TONE] to [ON] for easy adjustment.

[L]Set this between –6 dB and 0 dB

0 dB

in 1 dB increments.

 

 

[R]Set this between –6 dB and 0 dB

0 dB

in 1 dB increments.

 

 

[CENTER]

Set this between –6 dB and +6 dB

0 dB

in 1 dB increments.

(appears when you

 

set [CENTER] to

 

[YES] in the [SIZE]

 

setting.)

 

 

 

[SUBWOOFER]

Set this between –6 dB and +6 dB

0 dB

in 1 dB increments.

 

 

x[LEVEL (SURROUND)]

You can vary the level of surround speakers as follows. Be sure to set [TEST TONE] to [ON] for easy adjustment.

(This settings appear except when you set [SURROUND] to [NONE] in the [SIZE] setting.)

[L]Set this between –6 dB and +6 dB in

0 dB

1 dB increments.

 

 

[R]Set this between –6 dB and +6 dB in

0 dB

1 dB increments.

 

 

To adjust the volume of all the speakers at one timePress VOLUME +/– on the system, or press VOLUME +/– on the remote.x[TEST TONE]

The speakers will emit a test tone to adjust [LEVEL (FRONT)] and [LEVEL (SURROUND)].

[OFF] The test tone is not emitted from the speakers.

[ON] The test tone is emitted from each speaker in sequence while adjusting level. When you select one of the [SPEAKER SETUP] items, the test tone is emitted from each speaker in sequence.

Adjusting the speaker level by using the test tone

1 Press DISPLAY when the system is in stop mode.

continued

Adjustments and Settings

83US