Sony DAV-FX80 Settings for the Speakers, [SPEAKER SETUP], 82US, x[SIZE], x[DISTANCE], To return to the default setting when changing a setting

Settings for the Speakers

[SPEAKER SETUP]

To obtain the best possible surround sound, set for the size of the speakers you have connected and their distance from your listening position. Then use the test tone to adjust the level and the balance of the speakers to the same level.

Select [SPEAKER SETUP] in the Setup Display. For details, see “Using the Setup Display” (page 77).

The default settings are underlined.

Note

•You cannot operate these setup items when you connect headphones to the system.

SPEAKER SETUP

SIZE:

DISTANCE:

LEVEL(FRONT):

LEVEL(SURROUND):

TEST TONE: OFF

FRONT:YES

CENTER:YES

SURROUND:BEHIND

SUBWOOFER:YES

To return to the default setting when changing a setting

Select the item, then press CLEAR. Note that only the [SIZE] setting does not return to the default setting.

x[SIZE]

If you do not connect center or surround speakers, or move the surround speakers, set the parameters for [CENTER] and [SURROUND] and specify the surround speaker position. Since the front speaker setting is fixed, you cannot change them.

Position diagram

	90
A	45 A
B	B
	20

[FRONT] [YES]

[CENTER] [YES]: Normally select this. [NONE]: Select this if no center speaker is used.

[SURROUND] [BEHIND]: Select this if surround speakers are located in section B. [SIDE]: Select this if surround speakers are located in section A. [NONE]: Select this if no surround speaker is used.

[SUBWOOFER] [YES]

Note

•When you select an item, the sound cuts off for a moment.

•Depending on the settings of other speakers, subwoofer may be excessive.

x[DISTANCE]

The default distance setting for the speakers in relation to the listening position is shown below. When you set the distance using the Quick Setup (page 33), the settings is automatically displayed.

82US