Select [NO], then press .
xTo perform pairing of anotherSelect [YES], then press .
•If you perform the pairing operation between the unit and another
•When you perform pairing, [(PAIRING)] appears beside ID on the display for selecting ID.
To cancel pairingPerform the ID setting of the unit according to the procedure of “To set the ID of the unit.” If you select a new ID (you can select the same ID as before), pairing is canceled.
If sound transmission is unstable
For the surround amplifier
For the
If you use multiple wireless systems which sharing the 2.4 GHz band, such as wireless LAN or Bluetooth, the transmission of
1 Press SYSTEM MENU.
2 Press X/x repeatedly until “RFCHANGE” appears in the front panel display, then press or c.3 Press X/x to select the desired setting.
•“AUTO”: Normally select this. The system change “RF CHANGE” to “ON” or “OFF” automatically.
•“ON”: The system transmits sound by searching the better channel for transmitting.
•“OFF”: The system transmits sound by fixing the channel for transmitting.
4 Press .
The setting is made.
5 Press SYSTEM MENU.
The system menu turns off.
6 When you set “RF CHANGE” to “OFF,” select the ID so that sound transmission is most stabilized (page 78).
•When the wireless transmitter is not inserted in the unit, you cannot set “RF CHANGE.”
•In most cases, you will not need to change this setting.
•If “RF CHANGE” is set to “OFF,” transmission between the unit and
–
–
–
•The transmission may be improved by changing the transmission channel (frequency) of the other wireless system(s). For details, refer to the operating instructions of the other wireless system(s).