SENSOR POPCORN
NOTE: Do NOT use the metal shelf with the Sensor Popcorn program.
SENSOR | Step 3: Touch SENSOR POPCORN |
pad. No need to touch START, the oven | |
POPCORN | will start immediately. |
| |
|
|
The Sensor Popcorn feature is designed to be used only with prepackaged microwave popcorn weighing 3.0 to 3.5 ounces.
Step 1: Remove the outer wrapper from the microwave popcorn.
Step 2: Open oven door and place package of popcorn in the center of the oven floor as directed by the package instructions. Close oven door.
After the popcorn sensor detects steam, the oven signals and displays remaining cooking time needed.
Step 4: When cooking is completed, the oven signals and flashes ‘‘End’’. Open the door and remove the popcorn.
POWER
COOK
TIME
How to Adjust the Sensor Popcorn Program to Provide a Shorter or Longer Cook Time
If your favorite popcorn is not completely popped, there is a simple adjustment you can make.
Touch the SENSOR
POPCORN pad. (The oven will start immediately.) Then touch number pad 9. A plus
sign will appear on the
display beside the word “POP”. The plus sign indicates 20 seconds more cooking time is being provided.
If your favorite popcorn is overcooked, there is a simple adjustment you can make.
Touch the SENSOR
POPCORN pad. (The oven will start immediately.) Then touch number pad 1. A minus
sign will appear on the
display beside the word “POP”. The minus sign indicates 20 seconds less cooking time is being provided.
Questions and Answers
Q. I opened the door to check on the popcorn and “Error” appeared on the display. Why?
A.The Sensor Popcorn program first detects steam and then switches to Micro Cook. If you open the door while “POP” is displayed, “Error” will appear. Close the door, touch CLEAR/OFF and begin again. You may open the door when “End” appears on display.
Q. Can I use regular popcorn with the Sensor Popcorn feature in my microwave oven?
A. No. This automatic function is designed to be used only with prepackaged microwave popcorn.
Q. When I touched the POPCORN pad, the oven signalled and “HOT” appeared in the display, and the feature would not operate. Why?
A.If the temperature inside the oven is greater than 200°, the sensor will not operate properly as the oven does not allow the sensor cooking feature to be used.
SENSOR BEVERAGE
The Sensor Beverage program makes it simple to heat a cup of hot chocolate or other beverage. Use a cup that has no metal decoration and is
Touch SENSOR BEVERAGE pad. No need to touch START, the oven will start immediately.
The oven will signal and turn off automatically when finished.
CAUTION: Beverages heated with the Sensor Beverage feature may be quite hot. Remove the container with care.
20
