**Depending on the area, [720 × 480/576p] may appear.
x[CONTROL FOR HDMI]You can set the [CONTROL FOR HDMI] function to on/off. This function is available when you connect the system and TV with an HDMI cable. For details, see “Using the Control for HDMI Function for “BRAVIA” Sync” (page 70).
[ON]: On. You can operate mutually between components that are connected with an HDMI cable.
[OFF]: Off.
x[VOLUME LIMIT]If you change the output method of the TV to the system speakers via the TV menu (or by pressing THEATER), the System Audio Control (page 71) is activated and loud sound may be output depending on the volume level of the system. You can prevent this by limiting the maximum level of the volume.
[LEVEL3]: Maximum volume level is set to 10.
[LEVEL2]: Maximum volume level is set to 15.
[LEVEL1]: Maximum volume level is set to 20.
[OFF]: Off.
Note
•This function is available only when [CONTROL FOR HDMI] is set to [ON].
x[YCBCR/RGB (HDMI)]You can select the type of HDMI signal output from the HDMI OUT jack.
[YCBCR]: The system outputs YCBCR signals.
[RGB]: The system outputs RGB signals.
Note
•If the playback picture becomes distorted, set [YCBCR] to [RGB].
•If the HDMI OUT jack is connected to a component with a DVI jack, [RGB] signals will be automatically output even when you select [YCBCR].
x[AUDIO (HDMI)]You can select the audio output status from the HDMI OUT jack.
[OFF]: The system does not output sound from the HDMI OUT jack.
[ON]: The system outputs audio signals by converting Dolby Digital, DTS, or 96 kHz/24- bit PCM signals to 48
Note
•When you connect the unit and TV with an HDMI cable and [ON] is selected, [AUDIO DRC], [A/V SYNC], DYNAMIC BASS, “DEC. MODE,” and sound mode are not applied to the sound that is output from the TV.
•When you set the function to other than “DVD,” the system does not output the sound from the HDMI OUT jack even if you set [AUDIO (HDMI)] to [ON].
x[JPEG RESOLUTION]You can select the resolution of JPEG image files output from the HDMI OUT jack.
[SD 
]: The system outputs standard resolution with a black frame.
[HD 
]: The system outputs HD resolution with a black frame.
[HD]: The system outputs the HD resolution without a black frame.
[(1920 × 1080i) HD 
]: The system outputs full size HD resolution with a black frame. [(1920 × 1080i) HD]: The system outputs full size HD resolution without a black frame.
Note
•[JPEG RESOLUTION] is effective only when you set [TV TYPE] in [VIDEO SETUP] to [16:9], and you set [HDMI RESOLUTION] in [HDMI SETUP] to other than [720 × 480p] or [720 × 480/576p].
•You can select [(1920 × 1080i) HD 
] or [(1920 × 1080i) HD] only when you set [HDMI RESOLUTION] in [HDMI SETUP] to [1920 × 1080i].
•The HDMI signal will stop momentarily when:
–the system is loading or unloading a DATA CD or
DATA DVD.
–you change the disc from a DATA CD or DATA DVD.
–you play a DATA CD or DATA DVD to the end and the system stops playback automatically.
Disc