Step 3: TV and Video Component Hookups
Required cords
Video cord for connecting a TV monitor
Yellow
Yellow
Audio/video cords (not supplied)
When connecting a cord, be sure to match the
Yellow (Video) | Yellow (Video) |
White (L/audio) | White (L/audio) |
Red (R/audio) | Red (R/audio) |
Jacks for connecting video components
Connect a | To the |
TV monitor | MONITOR OUT jack |
|
|
VCR | VIDEO 1 jacks |
|
|
Digital satellite receiver | VIDEO 2 jacks |
|
|
zWhen using the S video jack instead of the video jacks
Your TV monitor must also be connected via an S video jack. S video signals are on a separate bus from the video signals and will not be output through the video jacks.
zWhen using the COMPONENT VIDEO OUT jacks (Y, PB/CB, PR/CR) instead of the video jacks
Your TV monitor must also be connected via COMPONENT VIDEO OUT jacks (Y, PB/CB, PR/CR). If your TV accept progressive format signals, you must use this connection and set “COMPONENT OUT” to “PROGRESSIVE” in “SCREEN SETUP” (page 67).
Notes
•When you select VIDEO 1 using the FUNCTION button, the signal is output from the front L/R speakers, but not from the VIDEO 1 VIDEO OUT and AUDIO OUT L/R jacks.
•When you use the Video 1 line outputs, please set the unit to 2CH STEREO mode. If the unit is not in 2CH STEREO mode, the line outputs may not function properly.
•When “PROGRESSIVE” is selected in “SCREEN SETUP,” no signal is output from the MONITOR OUT or S VIDEO OUT jacks.
•When the mode of the system is set to “DVD,” the signal is output from the S VIDEO OUT or COMPONENT OUT jacks.
•When the mode of the system is set to “DVD” and “PROGRESSIVE” is selected in “SCREEN SETUP,” the signal is output only from the COMPONENT OUT jacks.