Playing Discs
Playing Discs
Depending on the DVD or VIDEO CD, some operations may be different or restricted.
Refer to the operating instructions supplied with your disc.
POWER STANDBY indicator A H x
FUNCTION BAND DISPLAYSOUND FIELD
PHONES
FUNCTION
Adjust the Connect
volume headphones
Z(EJECT)
1
1 2 3 
FUNCTION
4 5 6
7 8 9
>10 10/0
Hx
1 Turn on your TV.
2 Switch the input selector on the TV to this system.
3 Press POWER on the system.
The system turns on.
Unless the mode of the system is set to “DVD,” press FUNCTION to select “DVD.”
4 Load a disc.
Push the disc into the disc slot until the disc is retracted automatically.
With the playback side facing down
5 Press H.
The system starts playback (continuous play). Adjust the volume on the system.
After following Step 5
Depending on the disc, a menu may appear on the TV screen. You can play the disc interactively by following the instructions on the menu. DVD (page 33), VIDEO CD (page 34).
To remove the disc
Press A on the system, or Z on the remote. Remove the disc after it is ejected from the system.
“READY !” appears on the front panel display.
To turn on the system
Press POWER on the system. The system turns on. In standby mode, the system also turns on by pressing A on the system or by pressing H.
To turn off the system
Press 1 on the remote. The system enters standby mode and the STANDBY indicator lights up in red. To turn off the system completely, press POWER on the system. While playing a disc, do not turn off the system by pressing POWER. Doing so may cancel the menu settings. When you turn off the system, first press x to stop playback and then press 1 on the remote.
continued