To change the speaker cables

If you want to use a different speaker cable, you can detach the plug for attachment to another cable.

Detaching

Catcher

With the catcher facing down, press and hold the plug down against a flat surface and remove the cords from plug.

Attaching

While pressing the plug down against a flat surface, insert the new speaker cords.

Note that the cord marked with a line should be attached to the minus (-) side of the plug.

Notes

•Be careful not to damage the surface you use (desk, etc.) when attaching/detaching the speaker cords.

•When using the subwoofer cord, note that the two outside black cords or the cords marked with letters are negative.

(–)

(–)

 

(+)

 

(+)

(–)

(–)

 

•If you connect the subwoofer cord with the polarity incorrect, the STANDBY indicator flashes, and the system enters standby mode.

Tips

•You can use any commercially sold speaker cable of gauge cord AWG #18 - AWG #22.

•Before attaching a new cable, strip off 10 mm of its insulation and twist the bare wires of both cords.

10 mm

Started Getting

15GB