Settings for the Speakers

(SPEAKER SETUP)

To obtain the best possible surround sound, set the size of the speakers you have connected and their distance from your listening position. Then use the test tone to adjust the level and the balance of the speakers to the same level.

Select [SPEAKER SETUP] in the Setup Display. For details, see “Using the Setup Display” (page 63).

The default settings are underlined.

SPEAKER SETUP

SIZE:

DISTANCE:

LEVEL:

BALANCE:

TEST TONE:

To return to the default setting when changing a setting

Select the item, then press CLEAR.

xSIZE

If you do not connect center or surround speakers, or move the surround speakers, set the parameters for [CENTER] and [SURROUND]. Since the front speaker and subwoofer settings are fixed, you cannot change them.

FRONT YES

CENTER YES: Normally select this. NONE: Select this if no center speaker is used.

SURROUND YES: Normally select this. NONE: Select this if no surround speaker is used.

SUBWOOFER YES

Notes

When you select an item, the sound cuts off for a moment.

Depending on the settings of other speakers, the subwoofer may output excessive sound.

xDISTANCE

The default distance setting for the speakers in relation to the listening position is shown below. When you set the distance using [QUICK SETUP] (page 19, 69), the setting is automatically displayed.

1.6m

1.6m1.6m

1.6m 1.6m

Be sure to change the value in the Setup Display when you move the speakers.

FRONT

Front speaker distance from the

1.6m*

listening position can be set in 0.2

 

meter increments from 1.0 to 7.0

 

meters.

 

 

CENTER

Center speaker distance can be moved

1.6m*

up to 1.6 meters forward closer to the

(appears when

listening position, in 0.2 meter

you set

increments.

[CENTER] to

 

[YES] in the

 

[SIZE] setting.)

 

 

 

SURROUND

Surround speaker distance can be

1.6m*

moved up to 4.6 meters closer to your

(appears when

listening position from the front

you set

speaker position, in 0.2 meter

[SURROUND]

to [YES] in the

increments.

[SIZE] setting.)

 

 

 

*When you perform the Quick Setup (page 19), the default settings are changed.

Notes

When you set the distance, the sound cuts off for a moment.

If all front and surround speakers are not placed at an equal distance from your listening position, set the distance according to the closest speaker.

Do not place the surround speakers farther away from your listening position than the front speakers.

The [DISTANCE] setting is available except for Super Audio CDs.

continued

Adjustments and Settings

67GB