23GB
Getting Started
6Remove the protection paper from the speaker-bottom cover, then attach the speaker-

bottom cover to the bottom of the upper part of the speaker.

Note
•When removing the protection paper, pull it off via the section exposed by the notch in the speaker-bottom cover.

To hang the speaker on a wall

1Connect the speaker cord with the color tube to 3, and the speaker cord without the

color tube to #.

2Prepare screws (not supplied) that are suitable for the hole on the back of each speaker.

See the illustrations below.

,,
Bottom of the upper part of
the speaker
Speaker-bottom cover
Protection paper
Color tube
Front left speaker (L): White
Front right speaker (R): Red
Center speaker: Green
Surround left speaker (L): Blue
Surround right speaker (R): Gray
30 mm (1 3/16 inches)
4 mm (3/16 inch)
Hole on the back of
the speaker
5 mm
(7/32 inch)
10 mm
(13/32 inch)