Installation and Connections

16

NOTE: While most speaker manufacturers adhere to an industry convention of using black terminals for negative and red ones for positive, some manufacturers may vary from this configuration. To assure proper phase, and optimal performance, consult the identification plate on your speaker, or the speaker’s manual to verify polarity. If you do not know the polarity of your speaker, ask your dealer for advice before proceeding, or consult

the speaker’s manufacturer.

6.Connections to a subwoofer are made via a line level audio connection from the Subwoofer Output £ to the line level input of a subwoofer with a built-in amplifier. If a passive subwoofer is used, the connection first goes to a power amplifier, which will be connected to one or more subwoofer speakers.

Video Equipment Connections

Video equipment is connected in a fashion similar to audio components. Again, the use of high-quality interconnect cables is recommended to preserve signal quality.

1.Connect a VCR’s audio and video Play/Out jacks to the Video 1 In jacks ß on the rear panel. The audio and Record/Out jacks on the VCR should be connected to the Video 1 Out jacks à on the AVR5.

2.Connect the audio and video outputs of a satellite receiver, cable TV converter or television set or any other video source to the Video 2 In jacks Þ.

3.Connect the audio and video outputs of a DVD or laser disc player to the DVD jacks °.

4.Connect the TV Monitor Out Ú

jacks on the receiver to the video input of your television monitor or video projector.

System and Power Connections

The AVR5 is designed for flexible use with external control components and power amplifiers. These connections are easy to make during an initial installation, or at a later date should you choose to upgrade your system.

Remote Control Extension

If the receiver is placed behind a solid or smoked glass cabinet door, the obstruc- tion may prevent the remote sensor from receiving commands. In this event, an optional remote sensor may be used. Connect the output of the remote sensor to the Remote Cont. In jack Á.

If other components are also prevented from receiving remote commands, only one sensor is needed. They may use this unit’s sensor or a remote eye by running a connection from the Remote Cont. Out jack ª to the Remote In jack on Harman Kardon or other compatible equipment.

External Audio Power Amplifier Connections

If desired, optional external power audio power amplifiers may be used with the AVR5. Connections to these amplifiers are made by using audio interconnect cables connected to both the Preamp Outputs ¢ on the rear panel and the audio input jacks of the external amplifiers.

External Audio Decoder Connection To provide for the ultimate flexibility, the AVR5 may be used in conjunction with optional, external decoders for Dolby Digital, DTS or other sources of 5.1 audio signals. If an external decoder is used, connect the output jacks of the decoder to the 6-Channel Direct inputs ¡, making sure to match channels.

These jacks may also be used for connec- tions to devices such as DVD players or High Definition Television (HDTV) sets or decoders that feature built-in digital surround decoders.

AC Power Connections

This unit is equipped with two accessory AC outlets. They may be used to power accessory devices, but they should not be used with high-current draw equipment such as power amplifiers. The total power draw may not exceed 100W to each outlet.

These Switched AC Outlets Ü will receive power only when the unit is on. This is recommended for devices that have no power switch, or a mechanical power switch that may be left in the “ON” position.

NOTE: Devices with electronic power switches may only go into a Standby mode when plugged in here.

Finally, when all connections are com- plete, plug the power cord into a non- switched 120-volt AC wall outlet. You’re almost ready to enjoy the AVR5!

Page 15
Image 15
Harman-Kardon AVR5 Speaker’s manufacturer, Video Equipment Connections, Remote Control Extension, AC Power Connections

AVR5 specifications

The Harman-Kardon AVR5 is a sophisticated A/V receiver designed to elevate your audio and visual experiences. Seamlessly integrating premium sound quality with advanced technology, it caters to both audiophiles and casual listeners alike.

One of the standout features of the AVR5 is its powerful amplification system. With a robust output that ensures dynamic range and clarity, the receiver delivers booming bass and crisp highs, creating an immersive sound stage that fills any room. The AVR5 supports multiple channels, allowing users to configure their home theater setups according to personal preferences, whether it’s a simple stereo system or a full surround sound environment.

Another significant characteristic is support for high-resolution audio formats. The AVR5 is compatible with various lossless audio codecs, ensuring that music and movie soundtracks are reproduced with impressive fidelity. This receiver enables listeners to fully appreciate their music library, with exceptional detail in both instrument separation and vocal clarity, providing an untainted listening experience.

Connectivity is also a priority with the Harman-Kardon AVR5. It features an array of inputs and outputs, including HDMI, optical, and RCA connections. The HDMI capabilities support 4K video passthrough, ensuring that your video content is delivered in stunning detail. Additionally, the receiver includes support for HDCP 2.2, which is essential for playing certain 4K content without compatibility issues.

One of the innovative technologies embedded in the AVR5 is its advanced room correction system. This technology measures the acoustics of your room and automatically adjusts the speaker settings to optimize sound performance. This ensures that whether you are listening to music or watching a movie, the audio is tailored to your specific environment, enhancing the overall experience.

Finally, the user interface of the AVR5 is designed with simplicity in mind. Easy-to-navigate menus and remote control functionality make it straightforward to adjust settings, switch inputs, or fine-tune audio preferences. The inclusion of smartphone compatibility enhances this convenience, allowing users to control the receiver from their mobile devices.

Overall, the Harman-Kardon AVR5 stands out as a versatile, high-performance receiver that combines cutting-edge technology with user-friendly features, making it an excellent choice for upgrading any home entertainment system.