Harman-Kardon AVR5 ChannelDirect Operation, External Amplifier Connection, Tuner Operation

Operation

23

For true two-channel stereo operation, press the Surround Off button ð or use the Surround /Channel Selector on the remote until STEREO appears briefly in the Information Display øto use only the front left and right speakers.

Note that the surround modes available will vary according to speaker selection. When NONE is selected, only Hall and Phantom modes may be used, as Pro Logic requires a center channel speaker.

•The AVR5 is equipped with a memory system that permits a different surround mode to be used with each of the input sources. You may select the mode that is most appropriate to each source, such as Pro Logic for a VCR or DVD player con- nected to a Video input, Hall for the CD input and Surround Off for the Tuner. When you select an input again for a subsequent listening session the system will automatically change to your pre- ferred surround mode for that input.

•To check the current surround mode at any time, press either Surround /

Channel Selector .

NOTE: Once a program has been encoded with surround information, it retains the surround matrix as long as the program is broadcast in stereo. Thus, movies with surround sound will carry surround information when they are broadcast via conventional TV stations, cable, pay TV and satellite transmission. In addition, a growing number of made- for-television programs, sports broad- casts, radio dramas and music CDs are also recorded in surround sound. You may obtain a list of these programs and discs from the Dolby Laboratories web site at www.dolby.com

When a program is not listed as carrying intentional surround information, you may find that Pro Logic or Dolby 3-Stereo modes often deliver enveloping surround presentations through the use of the natural information present in all stereo recordings. However, for stereo, but non- surround programs, we suggest that you try the Hall 1, Hall 2 or Theater modes.

6-Channel Direct Operation

The AVR5 is a digital-ready receiver, which means that it is equipped for use with optional, external digital audio decoders. This enables the AVR5 to serve you well into the future, through con- necting to a decoder for formats such as Dolby Digital or DTS.

You may also use these inputs for direct con- nection to DVD players or digital television sets that have built-in decoding for Dolby Digital. When one of these products is used, no external adapter or decoder is needed.

For 6-channel direct operation, connect the outputs of the decoder or other devices with decoded digital outputs to the 6-Channel Direct Inputs ¡ on the rear panel.

To listen to the 6-channel source, press the 6-Channel Direct Selector @© on the front panel or remote.

NOTE: Since the 6-channel input is a discrete source, the Surround mode selec- tors do not function when a 6-channel direct input is used. In addition, the record outputs may not be used when a 6-channel source is playing.

External Amplifier Connection

The AVR5 may be connected to optional, external amplifiers for applications when higher power output is desired. These out- puts may also be used to send the same source being listened to through the AVR5’s built-in amplifier to a second location.

To connect an external amplifier, simply connect the Preamp Outputs ¢ on the rear panel to the inputs of an optional, external power amplifier.

No special adjustments are required when an external power amplifier is in use. All volume and output adjustments are made using the standard controls.

Tuner Operation

The AVR5’s tuner is capable of tuning AM, FM and FM Stereo broadcast stations. Stations may be tuned manually, or they may be stored as favorite station presets and recalled from a 30-position memory.

Station Selection

1.Press the AM/FM button #Äto select the tuner as an input.

2.Press the AM/FM button #Äagain to switch between AM and FM so that the desired frequency band is selected.

3.To select stations press, and briefly hold, the Tuning button $§and the tuner will search for the next highest or lowest frequency station that has an acceptable signal. To tune to the next station, press the button again. Tap the Tuning button $§to advance one frequency increment at a time, or press and hold it to locate a specific station. When the TUNED indicator illuminates, the station is properly tuned and should be heard with clarity.