3 Press X/x repeatedly until “SET

VIDEO1” blinks in the front panel display, then press ENTER or c.

4 Press X/x to select “SET SAT1” (“SAT1” blinks) in the front panel display.

The input sensitivity is lowered.

5 Press ENTER or AMP MENU.

The AMP MENU turns off.

Note

•When connecting a component to the VIDEO 2/SAT 2 jack, select “VIDEO2” in step1, “SET VIDEO2” in step 3, and “SET SAT2” in step 4.

•If you select “SET VIDEO1(2)” in step 4, the operation is canceled and the mode display (the mode of the system in step 1) remains as “VIDEO1(2).”

Enjoying Multiplex

Broadcast Sound

(DUAL MONO)

You can enjoy multiplex broadcast sound when the system receive the Dolby Digital multiplex broadcast signal.

You can play bilingual broadcasts recorded on DVD-RWs in VR mode.

Note

•To receive the Dolby Digital signal, you need to connect a digital satellite tuner to the system with an optical cable or coaxial cable (page 28) and set the digital output mode of the digital satellite tuner to Dolby Digital.

X/x/c

ENTER

AMP MENU

With cover opened.

1 Press AMP MENU.

2 Press x/X repeatedly until “DUAL

MONO” appears in the front panel display, then press ENTER or c.

3 Press x/X to select the sound you want.

•MAIN: main sound is output from the left and right speakers.

•SUB: sub sound is output from the left and right speakers.

•MAIN+SUB: main sound and Sub sound are output from the left and right speakers.

•MAIN/SUB: main sound is output from the left speaker and Sub sound is output from the right speaker.

4 Press ENTER or AMP MENU.

The AMP menu turns off.

74GB