•If an FM program is noisy, press FM MODE so that “MONO” appears in the front panel display. There will be no stereo effect, but the reception will improve. Press the button again to restore the stereo effect.

•To improve reception, reorient the supplied antennas (aerials).

•You can check the frequency by pressing DISPLAY repeatedly (page 76).

Naming preset stations

You can enter a name for preset stations. These names (for example, “XYZ”) appear in the system’s front panel display when a station is selected.

Note that no more than one name can be entered for each preset station.

1 Press FUNCTION repeatedly until “FM”

or “AM” appears in the front panel display.

The last station you received is tuned in.

2 Press PRESET + or – repeatedly to select the preset station you want to create an index name for.

3 Press TUNER MENU.

4 Press C/X/x/c repeatedly until “NameIn?” appears in the front panel display.

TUNED ST

5 Press ENTER.

6 Create a name by using the cursor buttons.

Press X/x to select a character, then press c to move the cursor to the next position. Letters, numbers, and other symbols can be input for a radio station name.

If you make a mistake

Press C/c repeatedly until the character to be changed flashes, then press X/x to select the desired character.

To erase the character, press C/c repeatedly until the character to be erased flashes, then press CLEAR.

7 Press ENTER.

The station name is stored.

Viewing the Station Name or Frequency in the front panel display

When the system is set to “TUNER AM” or “TUNER FM,” you can check the frequency using the front panel display.

Press DISPLAY.

Each time you press DISPLAY, the display changes as shown in the charts.

tStation name*1

r

Frequency*2

*1 This is displayed if you have entered a name for a preset station (page 76).

*2 Returns to the original display when several seconds has elapsed.

76GB