Troubleshooting (Continued)

•In the following settings, still images cannot be recorded on a “Memory Stick Duo” during tape recording.

–[PROGRES.REC] (DCR-HC94E/HC96E)

–[SMTH INT.REC] (DCR-HC44E/HC46E/HC94E/HC96E)

•For DCR-HC36E:

You cannot record still images on the “Memory Stick Duo” using [WIDE SELECT] mode (p. 50).

The recording angle differs depending on the POWER switch setting position (DCR-HC44E/HC46E/HC94E/HC96E).

•The recording angle when the POWER switch is set to CAMERA-MEMORY is wider than when it is set to CAMERA-TAPE.

You cannot record a smooth transition on a tape from the last recorded scene to the next.

•Perform END SEARCH (p. 35).

•Do not remove the cassette. (The picture will be recorded continuously without a break even when you turn the power off.)

•Do not record pictures in SP mode and LP mode on the same tape.

•Avoid stopping then recording a movie in the LP mode.

The shutter sound is not heard when you record a still image.

• Set [BEEP] to [ON] (p. 64).

The internal flash does not work (DCR-HC94E/HC96E).

•You cannot use the internal flash with:

–Tape recording

–[SUPER NS]

–[COLOR SLOW S]

–[D. EFFECT]

–[PROGRES.REC]

–[BURST]

•Even if auto flash or (Auto redeye reduction) is selected, you cannot use the internal flash with:

–NightShot

–[SPOTLIGHT], [SUNSET&MOON], and [LANDSCAPE] of [PROGRAM AE]

–[EXPOSURE]

–[SPOT METER]

The external flash (optional) does not work (DCR-HC94E/HC96E).

• The power of the flash is not turned on, or the flash is not attached correctly.

[END SEARCH] does not work.

•Do not eject the cassette after recording (p. 35).

•There is nothing recorded on the cassette.

100