the lamp.
•The flash charge lamp flickers when charging the flash, and remains lit when the battery charge is complete. (In the
•If you use the flash in bright places such as when shooting a backlit subject, the flash may not be effective.
•Attaching a conversion lens (optional) may create a shadow.
•You can change the brightness of the flash by setting [FLASH LEVEL], or you can prevent the redeye by setting [REDEYE REDUC], in [FLASH SET] (p. 41).
To adjust the exposure for backlit | |
subjects ................................ |
To adjust the exposure for backlit subjects, press BACK LIGHT to display . To cancel the back light function, press BACK LIGHT again.
To adjust the focus for an off center | |
subject (SPOT FOCUS) ............... | |
See [SPOT FOCUS] on page 40. |
|
To fix the exposure for the selected | |
subject (Flexible spot meter) ....... | |
See [SPOT METER] on page 38. |
|
To record in mirror mode ............ | |
Open the LCD panel 90 degrees to the camcorder (), then rotate it 180 degrees to the lens side ().
•A
To use a tripod ........................ | |
Attach the tripod (optional: the length of the screw must be less than 5.5 mm (7/32 in.)) to the tripod receptacle using a tripod screw.
PlaybackTo play back the images in sequence
........................................... | |
| |
See [SLIDE SHOW] on page 46. |
| Recording/Playback | |
To use PB zoom .................. | | ||
|
You can magnify pictures from about 1.1 to 5 times the original size.
Magnification can be adjusted with the power zoom lever or the zoom buttons on the LCD frame.
Play back the picture you want to magnify.
Magnify the picture with T (Telephoto).
Touch the screen at the point you want to magnify within the displayed frame.
Adjust the magnification with W (Wide angle)/T (Telephoto).
To cancel, touch [END].
•You cannot change the zoom speed with the zoom buttons on the LCD frame.
Continued 23