You cannot view the pictures recorded on a tape on the computer. 
•Slide the POWER switch down to turn on the PLAY/EDIT lamp on your camcorder and set
•Disconnect the cable from the computer, then connect it again.
You cannot view the pictures recorded on a tape on a Macintosh computer.
•When you connect your camcorder to a Macintosh computer using a USB cable, you cannot copy pictures recorded on a tape to the computer. To copy recordings from a tape, connect your camcorder to the computer with an i.LINK cable and use the standard software in the OS.
You cannot view the pictures recorded on a “Memory Stick Duo” on the computer. 
•Insert a “Memory Stick Duo” in the correct direction, then push it all the way in.
•You cannot use an i.LINK cable. Connect the camcorder and the computer using the USB cable.
•Slide the POWER switch down to turn on the PLAY/EDIT lamp on your camcorder, set
•The computer does not recognize the “Memory Stick Duo” during camcorder operations such as tape playback or editing. Finish any camcorder operations before connecting the camcorder to the computer.
The “Memory Stick” icon ([Removable Disk] or [Sony Memory Stick]) does not appear on the computer screen. 
•Insert a “Memory Stick Duo” into your camcorder.
•Disconnect the USB device other than the keyboard, the mouse, and the camcorder from the computer.
•Slide the POWER switch down to turn on the PLAY/EDIT lamp on your camcorder, set
•The computer does not recognize the “Memory Stick Duo” during camcorder operations such as tape playback or editing. Finish camcorder operations before connecting the camcorder to the computer.
The image does not appear on the screen of the Windows computer when using the USB cable. 
•The USB driver has been registered incorrectly as the computer was connected to your camcorder before the installation of the USB driver was completed. Follow the procedure below to install the USB driver correctly.
Troubleshooting
Continued 93