To charge the battery pack using only the AC Adaptor

Slide the POWER switch up to OFF (CHG), then connect the AC Adaptor directly to the DC IN jack on the camcorder.

POWER switch

DC IN jack

DC plug

Open the jack cover

Available running time for the supplied battery pack NP-FP50

Charging time:

Approximate time (min.) required when you fully charge a completely exhausted battery pack.

Recording/Playback time:

Approximate time (min.) available when you use a fully charged battery pack.

 

 

(Unit:min.)

 

 

 

 

DCR-SR40

DCR-SR60/

 

SR80

 

 

Charging time

125

125

 

 

 

Recording time*1

 

 

Continuous

125

100*2

recording time

105*3

Typical

65

55*2

recording time*4

55*3

 

Playback time

140

115*2

*1 When [REC MODE] is set to [HQ]. *2 When the LCD backlight turns on. *3When the LCD backlight turns off.

*4 Typical recording time shows the time when you repeat recording start/stop, turning the power on/ off and zooming.

On the battery pack

•Before changing the battery pack, slide the POWER switch to OFF (CHG).

•The power will not be supplied from the battery as long as the AC Adaptor is connected to the DC IN jack of your camcorder, even when the power cord is removed from the wall outlet.

On the charging/recording/playback time

•Times measured with the camcorder at 25°C (77°F). (10-30°C (50-86°F) is recommended.)

•Available recording and playback time will be shorter when you use your camcorder in low temperatures.

•The available recording and playback time will be shorter depending on the conditions under which you use your camcorder.

On the AC Adaptor

•Connect the AC Adaptor to an easily accessible wall outlet close by. If any trouble occurs while using the adaptor, immediately shut off the power by removing the plug from the wall outlet.

•Do not use the AC Adaptor placed in a narrow space, such as between a wall and furniture.

•Do not short-circuit the DC plug of the AC Adaptor or battery terminal with any metallic objects. This may cause a malfunction.

PRECAUTION

•Even if your camcorder is turned off, AC power (house current) is still supplied to it while connected to the wall outlet via the AC Adaptor.

Power supply

You can use your camcorder in any countries/ regions using the AC Adaptor supplied with your camcorder within the AC 100 V to 240 V, 50/60 Hz range.

Use a commercially available AC plug adaptor [a], if necessary, depending on the design of the wall outlet [b].

AC-L25A/

L25B

[a] [b]

Started Getting

11