On the Remote Commander (DCR-SR60/SR80)

Using the Remote Commander for the first time

Remove the insulation sheet before using the Remote Commander.

Insulation sheet

To change the battery of the Remote Commander

1While pressing on the tab, inset your fingernail into the slit to pull out the battery case.

2Place a new battery with the + side facing up.

3 Insert the battery case back into the Remote Commander until it clicks.

Tab

WARNING

Battery may explode if mistreated. Do not recharge, disassemble or dispose of in fire.

•A button-type lithium battery (CR2025) is used in the Remote Commander. Do not use batteries other than the CR2025.

•When the lithium battery becomes weak, the operating distance of the Remote Commander may shorten, or the Remote Commander may not function properly. In this case, replace the battery with a Sony CR2025 lithium battery. Use of another battery may present a risk of fire or explosion.

Started Getting

9