Sony DCR-TRV240 Mode, POWER, switch, FORMAT, Meaning, FILE NO, * PROTECT, SLIDE SHOW, PHOTO SAVE, DELETE ALL, –Operate buttons, Notes on formatting, * Except DCR-TRV240

Changing the menu settings

				POWER
Icon/item		Mode	Meaning	switch
* PROTECT		ON	To protect selected images against accidental	VCR
			erasure (p. 170)	MEMORY
		zOFF	To not protect images
	SLIDE SHOW	——	To play back images in a continuous loop	MEMORY
			(p. 168)
	PHOTO SAVE	——	To copy still images on tape onto “Memory	VCR
			Stick” (p. 138)
	FILE NO.	zSERIES	To assign numbers to file in sequence even if the	VCR
			“Memory Stick” is changed	MEMORY
		RESET	To reset the file numbering each time the
			“Memory Stick” is changed
	DELETE ALL	zRETURN	To cancel deleting all images	MEMORY
		OK	To delete all unprotected images
	FORMAT	zRETURN	To cancel formatting	MEMORY
		OK	To format an inserted “Memory Stick”
			1. Select FORMAT with the SEL/PUSH EXEC
			dial, then press the dial.
			2. Select OK with the SEL/PUSH EXEC dial,
			then press the dial.
			3. After EXECUTE appears, press the
			SEL/PUSH EXEC dial. FORMATTING
			flashes during formatting. COMPLETE
			appears when formatting is finished.

Notes on formatting *

•Supplied “Memory Stick”s have been formatted at factory. Formatting “Memory Stick”s on your camcorder is not required.

•Do not do any of the following while FORMATTING is displayed:–Switch the POWER switch–Operate buttons–Remove the “Memory Stick”

•You cannot format the “Memory Stick” if the write-protect tab on the “Memory Stick” is set to LOCK.

•Format the “Memory Stick” when “ FORMAT ERROR” is displayed.Formatting erases all information on the “Memory Stick” *Check the contents of the “Memory Stick” before formatting.•Formatting erases sample images on the “Memory Stick.”•Formatting erases protected image data on the “Memory Stick.”* Except DCR-TRV240

(continued on the following page)

Camcorder Your Customizing

111