Recording an image from a tape as a still imageRecording a still image from other equipment

Before operation

Set DISPLAY to LCD in the menu settings. (The default setting is LCD.)

(1) Set the POWER switch to VCR.

(2) Play back the recorded tape, or turn the TV on to see the desired program. The image from TV or VCR appears on the screen of your camcorder.

(3) Follow the steps 3 and 4 on page 103.

Using the A/V connecting cable

 

AUDIO / VIDEO

OUT

S VIDEO

S VIDEO

 

VIDEO

 

: Signal flow

Connect the yellow plug of the A/V connecting cable to the video jack on the VCR or the TV.

If your TV or VCR has an S video jack

Connect using an S video cable (optional) to obtain high-quality pictures.

With this connection, you do not need to connect the yellow (video) plug of the A/V connecting cable.

Connect an S video cable (optional) to the S video jacks of both your camcorder and the TV or VCR.

Using the i.LINK cable (DV connecting cable)

DV

DV OUT

DV IN/OUT

(optional)

: Signal flow

Note

The “” may flash in the following instances. If this happens, eject and insert “Memory Stick“ again, and record distortion-free images.

When attempting to input images that are distorted due to poor radio wave reception when a TV tuner unit is in use

Between scenes or in the various playback modes on the tape recorded in Hi8/

104

standard 8 system