Sony DCR-TRV330, DCR-TRV530 Using with analog video unit and your computer – Signal convert function, After capturing images and sound

Using with analog video unit and your computer – Signal convert function

You can capture images and sound from an analog video unit connected to your computer which has the i. LINK (DV) jack to your camcorder.

Before operation

Set DISPLAY to LCD in the menu settings. (The default setting is LCD.)

(1)Set the POWER switch to VCR.

(2)Set A/V t DV OUT into ON in the menu settings. (P. 79)

(3)Start playback on the analog video unit.

(4)Start capturing procedures on your computer.

The operation procedures depend on your computer and the software which you use.

For details on how to capture images, refer to the instruction manual of your computer and software.

AUDIO/VIDEO
OUT
S VIDEO	VIDEO	DV IN/OUT
		i.LINK
VIDEO

AUDIO

AUDIO

(optional)

: Signal flow

After capturing images and sound

Stop capturing procedares on your computer, and stop the playback on the analog video unit.

Notes

•You need to install software which can exchange video signals.

•Depending on the condition of the analog video signals, the computer may not be able to output the images correctly when you convert analog video signals into digital video signals via your camcorder. Depending on the analog video unit, the image may contain noise or incorrect colors.

•You cannot record or capture the video output via your camcorder when the video includes copyright protection signals such as ID-2 system.

74