Sony DN798 owner manual Displaying Disc Information On-Screen, Initial Settings, General Operation

Displaying Disc Information On-Screen

You can display various information about the disc loaded on-screen.

1.Press DISPLAY to show various playback information.

The displayed items differ depending on the disc type or playing status.

2.You can select an item by pressing v / V and change or select the setting by pressing b / B.

•Title – Current title. number/total number of titles.

•Chapter – Current chapter number/total number of chapters.

•Time – Elapsed playing time.

•Audio – Selected audio language or channel.

•Subtitle – Selected subtitle.

•Angle – Selected angle/total number of angles.

Note:

If any button is not pressed for a few seconds, the on- screen display disappears.

Initial Settings

By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 13 to 14.

To display and exit the Menu:

Press SETUP to display the menu. A second press of SETUP will take you back to initial screen.

To go to the next level:

Press B on the Remote Control.

To go back to the previous level:

Press b on the Remote Control.

General Operation

1.Press SETUP.

The Setup menu appears.

2.Use v / V to select the desired option then press B to move to the second level. The screen shows the current setting for the selected item, as well as alternate setting(s).

3.Use v / V to select the second desired option and then press B to move to the third level.

4.Use v / V to select the desired setting then press ENTER to confirm your selection.

Some items require additional steps.

5.Press SETUP or PLAY (N) to exit the Setup menu.

12