40 GB
Specifying the playback device
You can specify a memory card to be
displayed.
1Press MENU.
The menu is displayed.
2Press B/b to select the (Select
device) tab.
The screen used for selecting a device is
displayed.
Tip
Insert the device at this point during the
procedure if the device you want to use cannot
be selected.
3Press v/V to select the device you
want to display and then press .
The images of the selected device are
displayed.
Tips
• You can also use the MENU button on the photo
frame.
• The search is cancelled automatically when you
change the playback device during a search.
Adjusting the image size and position
You can enlarge or reduce an image in single
view mode.
1To enlarge an image, press
(zoom in) on the remote control. To
reduce an enlarged image, press
(zoom out).
Each press of the button enlarges the
image further. You can enlarge an image
to a maximum of 5 times the original
scale. You can move an enlarged image
up, down, left, and right.
About crop and save
• The sc reen currently displayed is saved as it
was trimmed after you press B/b/v/V to
move the enlarged image and then press the
MENU button.
• You can select [Save as new image] or
[Overwrite] by pressing the MENU button
when the image is enlarged or reduced. Pr ess
v/V to select the method used to save the
image.
• If you selec t [Save as new image], the image
is saved as a new image.
• If you select [Overwrite], the image is
overwritten. A confirmation screen is
displayed when you select [Overwrite]. Press
v/V to select [Yes] and then press to
save the image. Press again when the
confirmation screen is displayed after saving
is finished.
Notes
• You cannot overwrite fil es except for a JPEG file
(extension: JPG).
• Enlarging an image may reduc e the quality
depending on the image size.
• It is not possible to enlarge an im age using the
buttons on the photo frame.

Enlarging/reducing an image