42 GB
Changing the settings of the auto power on/off function
You can use the timer function to turn the
photo frame on or off automatically when the
photo frame is turned on.
1Press MENU.
The menu is displayed.
2Press B/b to select the
(Settings) tab.
The settings screen is displayed.
3Press v/V to select [Auto power ON/

OFF] and press .

The screen used for setting a value for
[Auto power ON/OFF] is displayed.
When using DPF-A72/E72, you can set
the auto power function on [Simple] mode
only, so skip to step 5.
4Press v/V to select [Setup method],

and press . Then press v/V to

select [Simple] or [Advanced], and

press . (DPF-D72 only)

[Simple]: Sets the auto power ON/OFF
function finely in one minute increments.
[Advanced]: Sets the auto power ON/OFF
function according to a day of the week by
one hour units.
5Set the time setting.
[Simple]
1Press v/V to select [Auto power ON/
OFF] and then press .
2Press v/V to select [Enable] and then
press .
3Set the auto on/off timer.
Press v/V to set the time you want.
AM or PM is displayed on the right of
the screen when you select [12 hours]
on the time display setting.
4Set the auto ON/OFF day.
Press v/V to select the day you want to
use this function and then pr ess to
check. Press v/V to select [OK] and
then press .
[Advanced] (DPF-D72 only)
1Press B/b/v/V to select the time you
want to use the auto power on/off
function.
You can set this function according to a
day of the week by one hour units.
The color of the selected time zone
changes to blue after you press . The
power supply of the photo frame will be
turned on when the blue time zone time
occurs. The color of the selected time