Basic operations
Preparing the remote control
The supplied lithium battery (CR2025) has already been inserted into the remote control. Pull out the protective sheet before use as shown in the figure.
Protective sheet
Using the remote control
Point the top end of the remote control towards the remote sensor on the photo frame.
Remote sensor
Replacing the battery of the remote control
If the remote control stops working, replace the battery (CR2025 lithium battery) with a new one.
1 Pull out the battery holder.
While pressing in the tab of the battery holder, pull out the battery holder.
2 Remove the old battery from the battery holder and then insert a new battery.
Insert the battery so that “+” is facing upwards.
3 Reinsert the battery holder into the remote control.
WARNING
Battery may explode if mistreated. Do not recharge, disassemble or dispose of in fire.
Notes
•When the lithium battery becomes weak, the operating distance of the Remote conrol may shorten, or the Remote control may not function properly. In this case, replace the battery with a Sony CR2025 lithium battery. Use of another battery may present a risk of fire or explosion.