•After use, remove the AC adaptor from the
DC IN 12 V jack of the photo frame, and remove the AC adaptor from the outlet.
•This power unit is intended to be correctly orientated in a vertical or floor mount position.
Setting the stand
Opening the stand
Set the photo frame with opening the stand as below.
Setting to portrait or landscape orientation
You can set the photo frame to portrait or landscape orientation by rotating it without moving the stand.
When the photo frame is placed in the portrait orientation, the image is also automatically rotated to its proper orientation.
Notes
•Close the stand when you carry the photo frame.
•Check whether the stand is stable. If the stand is not set properly, the photo frame may fall over.
•When the photo frame is rotated to the portrait orientation, the menu, image information and index display are not rotated.